RPIO-TINY

From Land Boards Wiki
Revision as of 03:22, 10 January 2020 by Blwikiadmin (talk | contribs) (Created page with "File:RPIO-TINY-CCA-X2-640px.jpg == Raspberry Pi I/O Card == * This card provides connectors for all of the I/O pins of the Raspberry Pi. * The card provides the connecti...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

RPIO-TINY-CCA-X2-640px.jpg

Raspberry Pi I/O Card

  • This card provides connectors for all of the I/O pins of the Raspberry Pi.
  • The card provides the connections on GVS connectors with provide a Ground/Voltage/Signal connection for each connection.
  • The GPIO lines on a Raspberry Pi are 3.3V.
  • The card has a fuse in case there is a short on the 3.3V power.

Board Design

Rev X2

RPIO-TINY-PWB-X2.png

Rev X1

File:RPIO-TINY.png

Connections

RasPi-GPIOs.png

Factory Testing

cd RasPi/RPIO-TINY/
sudo python pyRPIO-TINY.py
Retrieved from "http://land-boards.com/blwiki/index.php?title=RPIO-TINY&oldid=1473"