BBB-GVS-3
Revision as of 12:38, 25 January 2020 by Blwikiadmin (talk | contribs) (→Python pin assignments by header J number)
Contents
Features
- (19) GPIOs, GVS pins
- GVS pins
- (3) UARTs, GVTxRx pins
- GVTxRx pins
- (1) I2C bus, GVSdaSck
- GVSdaSck
- (8) Channels of 3.3V to 5V level translators
- Use female to female jumpers to route the GPIO lines to the translator channels
- 5V side has GVS pins
- (7) 1.8V analog GVS connections with analog voltage/ground
- Buffer opamps on the analog inputs
- 5V pins are all ESD protected pins with 15 kV of protection
- Selectable 5V source (SYS_5V or VDD_5V)
LEDs for 3.3V and 5V power
- Cape configuration EEPROM with write enable jumper
- Beaglebone Black form factor
Connectors
Card Header GPIO BBB Pin J1 SPI1_D1 P9_30 J2 GPIO3_19 P9_27 J3_3 UART1_RX P9_26 J3_4 UART1_TX P9_24 J4 GPIO1_17 P9_23 J5_3 UART2_TX P9_21 J5_4 UART2_RX P9_22 J6_3 I2C1_SDA P9_18 J6_4 I2C1_SCL P9_17 J7 GPIO1_16 P9_15 J8_3 UART4_TX P9_13 J8_4 UART4_RX P9_11 J9 EHRPWM1A P9_14 J10 GPIO1_28 P9_12 J12 GPIO1_29 P8_26 J13 EHRPWM2A P8_19 J14 GPIO2_1 P8_18 J15 GPIO0_27 P8_17 J16 GPIO1_14 P8_16 J17 GPIO1_15 P8_15 J18 EHRPWM2B P8_13 J19 GPIO1_12 P8_12 J20 GPIO1_13 P8_11 J21 TIMER5 P8_09 J22 TIMER6 P8_10 J23 TIMER4 P8_07 J24 TIMER7 P8_08
EEPROM Connections
- The EEPROM connections are on I2C and have on-board pullup resistors.
- The connections are local to the card.
- The EEPROM part number is CAT24C256WI-GT3 [1]
J11 - WE
- GND
- VCC
- WE
Python pin assignments by header J number
J1 = "P9_30" # GR-1 - D0 J2 = "P9_27" # BL-1 - D16 J3_3 = "P9_26" # VI-1 - D1 J3_4 = "P9_24" # GY-1 - D17 J4 = "P9_23" # WH-1 - D2 J5_3 = "P9_21" # BL-1 - D18 J5_4 = "P9_22" # BR-2 - D3 J7 = "P9_15" # RD-2 - D19 J8_3 = "P9_13" # OR-2 - D4 J8_4 = "P9_11" # YL-2 - D20 J9 = "P9_14" # GR-2 - D5 J10 = "P9_12" # BU-2 - D21 J20 = "P8_11" # VI-2 - D6 J21 = "P8_9" # GY-2 - D22 J22 = "P8_10" # WH-2 - D7 J23 = "P8_7" # BL-2 - D23 J24 = "P8_8" # BR-3 - D8 J12 = "P8_26" # RD-3 - D24 J13 = "P8_19" # OR-3 - D9 J14 = "P8_18" # YL-3 - D25 J15 = "P8_17" # GR-3 - D10 J16 = "P8_16" # BU-3 - D26 J17 = "P8_15" # VI-3 - D11 J18 = "P8_13" # GY-3 - D27 J19 = "P8_12" # WH-3 - D12
