Frequency Calibration via GPS

From Land Boards Wiki
Revision as of 17:55, 27 November 2020 by Blwikiadmin (talk | contribs)
Jump to navigation Jump to search
  • NEO-7M GPS Module
    • U-Center Programming Software
    • Set to 8 MHz on PPS pin
    • SMA Female connector
  • Remote Amplified GPS Antenna
    • SMA Male connector
  • FTDI-49MM
    • Used to program the GPS module
  • Pulse Generator modified to provide 50 Ohms, 5V drive
Retrieved from "http://land-boards.com/blwiki/index.php?title=Frequency_Calibration_via_GPS&oldid=5653"