DigIO16-I2C

From Land Boards Wiki
Revision as of 17:07, 1 January 2020 by Blwikiadmin (talk | contribs) (Created page with "File:DigIO16-I2C-X3-CCA-5454-640px.jpg == Features == * MCP23017 - 16 bit GPIO * I2C host interface * MCP23017 I2C Parallel I/O * Two Wire interface * 100/400 KHZ operat...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

DigIO16-I2C-X3-CCA-5454-640px.jpg

Features

  • MCP23017 - 16 bit GPIO
  • I2C host interface
  • MCP23017 I2C Parallel I/O
  • Two Wire interface
  • 100/400 KHZ operation
  • 25mA sink/source capability per I/O
  • Jumper selectable terminators
  • 3-bit address (Jumper selectable) - Up to 8 boards
  • Daisy-chained 4-pin host interface connector (Ground, Power, Clock, Data)
  • I2C Connector
  • Power Connector
  • DB-25 Connector for GPIO lines
  • 24LC024 Personality EEPROM
  • 3.3V or 5V operation
  • Compatible with Arduino, Raspberry Pi, BeagleBone Black
  • 95x95mm form factor
  • (4) 6-32 mounting holes - one on each corner

Connectors

Schematic

Driver

Assembly Sheet

Retrieved from "http://land-boards.com/blwiki/index.php?title=DigIO16-I2C&oldid=688"