Octopus Tester

Features

• Classic Octopus Tester
  • Design example (N5BL)
• Scope set to X-Y for voltage-vs-current measurement of part
  • Look at scope pattern for device signature
• Out of circuit component tester
  • Useful for matching parts like diodes
• In circuit component tester
  • Test 2 units and compare signatures on scope
• Use 6.3V "filament" transformer
  • 8.91V - Vpeak
  • 17.82V - Vpeak-peak
• 1mA, 10mA switch
  • Pot adjustments to set current (transformer variances)
• 2 BNC jacks
  • Timebase = XY
  • Connect to XY on scope (X=CH1, Y=CH2)
  • CH1 gets set to INVERT
• Plus, Minus Banana jacks
• AC powered
• C13 jack with switch
• Fuse
• Build into Bud Box CU-1945

X-Y Patterns

Resistors

• Resistor - slope line
  • Slope = resistance value
• 1 mA setting = 8901 ohms
• 10 mA setting = 890 ohms

Capacitors

• Oval shape
• 0.47uF, 60 Hz = 5643 ohms
• 1uF, 60 Hz = 2652 ohms
• 3.3uF, 60 Hz = 803 ohms

Schematics

Cutouts on Bud Box CU-1945