WA3TFS SDR Upverter Design

• SDR up-converter/receiver shifts low frequencies up by 100 MHz
  • Used to listen to HF frequencies on an inexpensive RTL-SDR module
• 1 kHz to 1.7 GHz SDR Receiver - WA3TFS Design
  • QST Article
  • SDR wiring diagram
  • Parts List
  • Layout

Software

• HDSDR - Easier to use
• SDR Sharp - Crashier

Enclosure

• Board fits perfectly in
  • Extruded Aluminum Enclosure Box - 94mm x 83mm x 30mm

Build

• Nice silver mica caps
• Real SBL-1 mixer
• Build was tough due to very small pads on the PCB
  • Particularly tough to solder ground pads
  • Pad shapes were not round so less area to set soldering iron
• Pin 1 orientations on the mixer and oscillator "backwards" from other board legends
• My kit was missing the center cap of the band filter (150 pF)