LEDS-SWITCHES-2 Assembly Sheet Rev 1
Revision as of 13:35, 25 May 2022 by Blwikiadmin (talk | contribs)
- Resistors and Right Angle Header mount to rear of card
Parts List
| Qty | Value | RefDes | Qty | Value | RefDes | |
|---|---|---|---|---|---|---|
| 16 | 10K (¼ W) | R1-R16 | 8 | SWITCH, PUSHBUTTON, 6MM (NOTE 3) | PB1-PB8 | |
| 8 | 1K (¼ W) (NOTE 1) | R17-R24 | 8 | Slide Switch, SS12D00G3 (ebay) (amazon) (NOTE 4) | SS1-SS8 | |
| 8 | LED, 5MM (NOTE 2) | D1-D8 | 1 | HEADER, RIGHT ANGLE, 0.1" PITCH, 2X16 | J1 |
Notes
- LED ballast resistor. Select value based on desired brightness. I like less bright LEDs.
- Select LED color. I prefer Orange. Select diffused or clear. I prefer diffused.
- Select pushbutton height per your preference. I like 6mm tall.
- 0.1" pins. Select either SS12D00G3 3 pin slide switch or 3 pin headers.
