SYNTH-MIDI-CTL-01

Features

Adapted from HAGIWO's MIDI to CV module
- Translate from Japanese to English using browser
XAIO RP2040 CPU
- Arduino MIDI library has not yet been ported to Pico so will need to use CircuitPython MIDI Library
MIDI In/Out
- Standard MIDI Jacks
- MIDI out jack for future functionality
(2) 0-5V Analog CV outs
- MCP4822 12-bit D/A - SPI Interface
  - MCP4822 Datasheet
- Use with SYNTH-VCO-01
  - CV1 = V/OCT
  - CV2 = MOD
(2) Digital Outs, eX:
- Gate
- Clock
Pot supports setting Clock rate
Standard EuroRack 16 pin header
- Supports 12V in with on-board 5V regulator
- 5V regulator can be not installed if 5V is available on EuroRack connection
Card is not a Eurorack card
- Probably too deep, needs cabling
(6) 6-32 Mounting holes
- Stacks with SYNTH-VCO-01 card