Sample and Hold on ER-PROTO-02

From Land Boards Wiki
Revision as of 14:40, 21 November 2022 by Blwikiadmin (talk | contribs) (→‎Nets)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Features

  • Sample and Hold
  • Internal sample rate adjust
  • Trigger in
  • +/-12V in/out

Design

  • Main

ER-PROTO02 SAMP-HOLD MAIN SCHEM.PNG

  • Internal Clock

ER-PROTO02 SAMP-HOLD INT CLK SCHEM.PNG

  • Jacks

ER-PROTO02 SAMP-HOLD JACKS J29 SCHEM.PNG

  • Pots

ER-PROTO02 SAMP-HOLD POTS J28 SCHEM.PNG

  • Eurorack Power
    • Uses 2x5 box IDC connector

ER-PROTO02 SAMP-HOLD POWER J9 SCHEM.PNG

Nets

  (nets
    (net (code "2") (name "+12V")
      (node (ref "D2") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "R3") (pin "2") (pintype "passive"))
      (node (ref "U1") (pin "14") (pinfunction "VCC") (pintype "power_in"))
      (node (ref "U2") (pin "1") (pinfunction "V+") (pintype "passive")))
    (net (code "4") (name "-12V")
      (node (ref "D3") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "U2") (pin "4") (pinfunction "V-") (pintype "passive")))
    (net (code "6") (name "/INT_CLK")
      (node (ref "J29") (pin "11") (pinfunction "J3_R_N") (pintype "passive"))
      (node (ref "R1") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "3") (pintype "output")))
    (net (code "7") (name "/RV1_CW")
      (node (ref "J28") (pin "17") (pinfunction "POT1_1_CW") (pintype "passive"))
      (node (ref "R1") (pin "2") (pintype "passive")))
    (net (code "8") (name "/RV1_W")
      (node (ref "C1") (pin "1") (pintype "passive"))
      (node (ref "J28") (pin "18") (pinfunction "POT1_2_W") (pintype "passive"))
      (node (ref "U1") (pin "1") (pintype "input"))
      (node (ref "U1") (pin "2") (pintype "input")))
    (net (code "9") (name "/SH_IN")
      (node (ref "J29") (pin "10") (pinfunction "J1_T") (pintype "passive"))
      (node (ref "U2") (pin "3") (pinfunction "I") (pintype "input")))
    (net (code "10") (name "/SH_OUT")
      (node (ref "J29") (pin "8") (pinfunction "J2_T") (pintype "passive"))
      (node (ref "R7") (pin "2") (pintype "passive")))
    (net (code "11") (name "/TRIG_IN")
      (node (ref "J29") (pin "12") (pinfunction "J3_T") (pintype "passive"))
      (node (ref "R2") (pin "1") (pintype "passive")))
    (net (code "12") (name "GND")
      (node (ref "C1") (pin "2") (pintype "passive"))
      (node (ref "C3") (pin "2") (pintype "passive"))
      (node (ref "D1") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "Q1") (pin "1") (pinfunction "E") (pintype "passive"))
      (node (ref "R4") (pin "1") (pintype "passive"))
      (node (ref "R6") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "7") (pinfunction "GND") (pintype "power_in"))
      (node (ref "U2") (pin "7") (pinfunction "T") (pintype "passive")))
    (net (code "13") (name "Net-(C2-Pad1)")
      (node (ref "C2") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "4") (pintype "output")))
    (net (code "14") (name "Net-(C2-Pad2)")
      (node (ref "C2") (pin "2") (pintype "passive"))
      (node (ref "R4") (pin "2") (pintype "passive"))
      (node (ref "U1") (pin "8") (pintype "input"))
      (node (ref "U1") (pin "9") (pintype "input")))
    (net (code "15") (name "Net-(C3-Pad1)")
      (node (ref "C3") (pin "1") (pintype "passive"))
      (node (ref "U2") (pin "6") (pinfunction "Ch") (pintype "passive")))
    (net (code "16") (name "Net-(D1-Pad1)")
      (node (ref "D1") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "Q1") (pin "2") (pinfunction "B") (pintype "input"))
      (node (ref "R2") (pin "2") (pintype "passive")))
    (net (code "17") (name "Net-(D2-Pad2)")
      (node (ref "D2") (pin "2") (pinfunction "A") (pintype "passive"))
      (node (ref "R8") (pin "1") (pintype "passive")))
    (net (code "18") (name "Net-(D3-Pad1)")
      (node (ref "D3") (pin "1") (pinfunction "K") (pintype "passive"))
      (node (ref "R9") (pin "2") (pintype "passive")))
    (net (code "19") (name "Net-(Q1-Pad3)")
      (node (ref "Q1") (pin "3") (pinfunction "C") (pintype "passive"))
      (node (ref "R3") (pin "1") (pintype "passive"))
      (node (ref "U1") (pin "5") (pintype "input"))
      (node (ref "U1") (pin "6") (pintype "input")))
    (net (code "20") (name "Net-(R5-Pad1)")
      (node (ref "R5") (pin "1") (pintype "passive"))
      (node (ref "R6") (pin "2") (pintype "passive"))
      (node (ref "U2") (pin "8") (pinfunction "Hold") (pintype "input")))
    (net (code "21") (name "Net-(R5-Pad2)")
      (node (ref "R5") (pin "2") (pintype "passive"))
      (node (ref "U1") (pin "11") (pintype "output")))
    (net (code "22") (name "Net-(R7-Pad1)")
      (node (ref "R7") (pin "1") (pintype "passive"))
      (node (ref "U2") (pin "5") (pintype "output")))
    (net (code "23") (name "Net-(U1-Pad10)")
      (node (ref "U1") (pin "10") (pintype "output"))
      (node (ref "U1") (pin "12") (pintype "input"))
      (node (ref "U1") (pin "13") (pintype "input")))

ER-PROTO-02 Card Set

ER-PROTO-02-SET FRONT REAR-3D-720px.png

Retrieved from "http://land-boards.com/blwiki/index.php?title=Sample_and_Hold_on_ER-PROTO-02&oldid=22407"