ER-VCF-01 Rev 3 Assembly Sheet
Revision as of 22:47, 24 January 2023 by Blwikiadmin (talk | contribs) (Created page with "== Three card set == * PROTO-02 Front Panel * PROTO-02 Controls Card * ER-VCF-01 Analog Card == PROTO-02 Controls Card == FILE:ER-PROTO-01_CAD_FRONT_REAR.png * RV1, RV...")
Three card set
- PROTO-02 Front Panel
- PROTO-02 Controls Card
- ER-VCF-01 Analog Card
PROTO-02 Controls Card
- RV1, RV3 = DNP
- RV2, RV4, RV5, RV6 = B100K
- J1-J4 = PJ301BM
- R4, R6 = 100K
- R2, R5 = 0
- Wire J10-4 (J2-T) to RV4-3
ER-VCF-01 Analog Card
- Cut etch J4-T near R5
- Add 1K resistor J4-T to via
- Interactive BOM
- J2, J3 get mounted to the rear of the card
- Add wire J2-13 to r6 pin near J2
- D4-D9 - matched
| Find | Qty | Ref Des | Part Number | Find | Qty | Ref Des | Part Number | |
|---|---|---|---|---|---|---|---|---|
| 1 | 12 | D1-D12 | 1N4148 | 10 | 1 | C1 | 1uF | |
| 2 | 2 | D13, D14 | 1N5817 | 11 | 5 | C2-C4, C11, C12 | 1nF | |
| 3 | 2 | R1, R9 | 10K | 12 | 2 | C5, C6 | 0.1uF | |
| 4 | 6 | R2, R4, R7, R20-R22 | 100K | 13 | U1, U2 | TL074 | ||
| 5 | 1 | R5 | 47K | 14 | J1 | ER-PWR-2X5 | ||
| 6 | 3 | R6, R8, R11 | 1K | 15 | J2 | HEADER, 2X8 (REAR) | ||
| 7 | 3 | R10, R12, R19 | 2.2K | 16 | J3 | HEADER, 1X8 (REAR) | ||
| 8 | 7 | R13, R14-R18, R23 | 33K | |||||
| 9 | 2 | R24, R25 | 10 |
