VGAX49

Features

• Digital VGA adapter
• 16-bit digital video
  • 5:6:5 (R:G:B) mapping (maximum)
  • 2:2:2 (R:G:B) mapping (option)
• Uses summing resistors
• DB-15F connector
• 49x49mm ODAS form factor
• Mounting holes

Connectors

Simulation

2:2:2 Resistor Simulation

• 3.3V Drive out of FPGA
• 1V is drive level for VGA specification
• 8 mA max drive current
• VGA presents a 75 Ohm load
• Series resistors present a voltage divider between the resistors on the card and the VGA load
• 1V at 75 Ohms is 13.3 mA
• Each color is independently driven
• The resistor with the smaller value has larger current from the FPGA pin

5:6:5 Resistor Simulation

• 3.3V Drive out of FPGA
• 1V is drive level for VGA specification
• 8 mA max drive current
• VGA presents a 75 Ohm load
• Series resistors present a voltage divider between the resistors on the card and the VGA load
• 1V at 75 Ohms is 13.3 mA
• Each color is independently driven

Schematic

• VGAX49 schematic

Assembly Sheet

• VGAX49 Assembly Sheet