Frequency Calibration via GPS
Revision as of 17:56, 27 November 2020 by Blwikiadmin (talk | contribs)
8 Mhz Output synchronized to GPS satellites
Features
- NEO-7M GPS Module
- U-Center Programming Software
- Set to 8 MHz on PPS pin when locked
- Set to 2 Hz on PPS pin when not locked
- SMA Female connector
- Remote Amplified GPS Antenna
- SMA Male connector
- FTDI-49MM
- Used to program the GPS module
- Pulse Generator modified to provide 50 Ohms, 5V drive
