Difference between revisions of "ArduinoInABox"

From Land Boards Wiki
Jump to navigation Jump to search
Line 7: Line 7:
 
* Flexible Input power
 
* Flexible Input power
 
* I/O Boards
 
* I/O Boards
** Arduino pins brought to 2x13 header
 
*** I/O pins are on 0.1" grid for easier prototyping
 
*** P2-P13, A0-A3
 
*** A4/A5 or SDA/SCL
 
** Easily designed
 
** 3 BNC or SMA connectors
 
*** Brought to headers
 
*** DB25 pass-through
 
 
* Mounts in a standard box
 
* Mounts in a standard box
  
Line 54: Line 46:
 
=== I/O Boards ===
 
=== I/O Boards ===
  
* Connectors are placed on 0.1" grid
+
** Arduino pins brought to 2x13 header
** 26 pin, 3 BNC/SMA connectors
+
*** I/O pins are on 0.1" grid for easier prototyping
 +
*** P2-P13, A0-A3
 +
*** A4/A5 or SDA/SCL
 +
** Easily designed
 +
** 3 BNC or SMA connectors
 +
*** Brought to headers
 +
*** DB25 pass-through
  
 
==== DB-25 Example ====
 
==== DB-25 Example ====

Revision as of 19:27, 17 October 2021

ArduinoInABox.png

Features

  • Arduino Pro Mini
  • Detachable Human Interface design (HID)
  • Flexible Input power
  • I/O Boards
  • Mounts in a standard box

Arduino Pro Mini

  • Inexpensive and widely available
  • I/O
    • 14 digital input/output pins (of which 6 can be used as PWM outputs)
    • 6 analog inputs
  • On-board resonator
  • Reset button
  • A six pin header can be connected to an FTDI cable provide USB power and communication to the board
  • 3.3 or 5V
  • 8 MHz (3.3V or 16 MHz (5V)
  • Programmable in Arduino IDE

File:Http://land-boards.com/blwiki/images/c/c5/ArdruinoProMini-EBAY PART-720px.png

Detachable Human Interface design (HID)

Input power

  • Wide input voltage range
    • 5-23V (for 3.3V Arduino Pro Mini)
    • 7-23V (for 5V Arduino Pro Mini)
  • 2.1mm DC Power Connector Jack
  • RF filter into Switching regulator board
  • 2nd RF filter into HID card
  • Mini360 Switching Mode Power Supply
    • About $1

I/O Boards

    • Arduino pins brought to 2x13 header
      • I/O pins are on 0.1" grid for easier prototyping
      • P2-P13, A0-A3
      • A4/A5 or SDA/SCL
    • Easily designed
    • 3 BNC or SMA connectors
      • Brought to headers
      • DB25 pass-through

DB-25 Example

  • Standard DB-25 female
  • Similar to (but narrower and female)

DB25RIBBONADAPTER-P445-720px.jpg

DB25-02 Schematic.PNG

DB25-02 Pinout.PNG

DB25-02 Mechs.PNG

DB25-02 3D.png

DB-25 Mechs DBdMtg.png

Mechanicals/Enclosure

  • Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search

VFO-003 P1871 720px.jpg

ArduinoInABox Mechs.png

VFO-003 FrontPanel Holes.PNG

VFO-003 RearPanel Holes.PNG