Difference between revisions of "ArduinoInABox"

From Land Boards Wiki
Jump to navigation Jump to search
Line 49: Line 49:
 
=== I/O Boards ===
 
=== I/O Boards ===
  
** Arduino pins brought to 2x13 header
+
* Arduino pins brought to 2x13 header
*** I/O pins are on 0.1" grid for easier prototyping
+
** I/O pins are on 0.1" grid for easier prototyping
*** P2-P13, A0-A3
+
** P2-P13, A0-A3
*** A4/A5 or SDA/SCL
+
** A4/A5 or SDA/SCL
** Easily designed
+
* Easily designed
** 3 BNC or SMA connectors
+
* 3 BNC or SMA connectors
*** Brought to headers
+
** Brought to headers
*** DB25 pass-through
+
** DB25 pass-through
  
 
[[file:DB-25_Mechs_DBdMtg.png]]
 
[[file:DB-25_Mechs_DBdMtg.png]]

Revision as of 19:57, 17 October 2021

ArduinoInABox.png

Features

  • Arduino Pro Mini
  • Detachable Human Interface design (HID)
  • Flexible Input power
  • I/O Boards
  • Mounts in a standard extruded Aluminum enclosure

Arduino Pro Mini

  • Inexpensive and widely available
  • I/O
    • 14 digital input/output pins (of which 6 can be used as PWM outputs)
    • 6 analog inputs
  • On-board resonator
  • Reset button
  • A six pin header can be connected to an FTDI cable provide USB power and communication to the board
  • 3.3 or 5V
  • 8 MHz (3.3V or 16 MHz (5V)
  • Programmable in Arduino IDE

ArdruinoProMini-EBAY PART-720px.png

Detachable Human Interface design (HID)

Input power

  • Wide input voltage range
    • 5-23V (for 3.3V Arduino Pro Mini)
    • 7-23V (for 5V Arduino Pro Mini)
  • 2.1mm DC Power Connector Jack
  • RF filter into Switching regulator board
  • 2nd RF filter into HID card
  • Mini360 Switching Mode Power Supply
    • About $1
  • Jumper to use raw input and not populate the Mini360
    • Uses the inputs jack as RAW power into the Arduino Pro Mini
    • 3.35-12 V (3.3V model) or 5-12 V (5V model)

I/O Boards

  • Arduino pins brought to 2x13 header
    • I/O pins are on 0.1" grid for easier prototyping
    • P2-P13, A0-A3
    • A4/A5 or SDA/SCL
  • Easily designed
  • 3 BNC or SMA connectors
    • Brought to headers
    • DB25 pass-through

DB-25 Mechs DBdMtg.png

Connectors

J2 - On HID =

ARB J2.PNG

J3 - On base board

ARB J3.PNG

J5 - Arduino Pins

ARB J5.PNG

J9 - Use Raw Power

AIB J9.PNG

DB-25 Example

  • Standard DB-25 female
  • Similar to (but narrower and female)

DB25RIBBONADAPTER-P445-720px.jpg

DB25-02 Schematic.PNG

DB25-02 Pinout.PNG

DB25-02 Mechs.PNG

DB25-02 3D.png

Mechanicals/Enclosure

  • Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search

VFO-003 P1871 720px.jpg

ArduinoInABox Mechs.png

VFO-003 FrontPanel Holes.PNG

VFO-003 RearPanel Holes.PNG