ArduinoInABox

From Land Boards Wiki
Jump to navigation Jump to search

ArduinoInABox.png

Features

  • Arduino Pro Mini
    • Inexpensive and widely available
    • 4 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers
  • A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
    • 3.3 or 5V
    • 8 MHz or 16 MHz
    • Programmable in Arduino IDE
  • Detachable Human Interface design (HID)
    • OLED
    • Rotary Encoder with switch
    • Can leave attached until installing in box
  • Wide input voltage range
    • RF filters on OLED and into board
    • Mini360 Switching Mode Power Supply
  • I/O Boards
    • Arduino pins brought to 2x13 header
      • P2-P13, A0-A3
      • A4/A5 or SDA/SCL
    • Easily designed
    • 3 BNC or SMA connectors
      • Brought to headers
      • DB25 pass-through
  • Mounts in a standard box

I/O Card

  • Connectors are placed on 0.1" grid
    • 26 pin, 3 BNC/SMA connectors

DB-25 Example

  • Standard DB-25 female
  • Similar to (but narrower and female)

DB25RIBBONADAPTER-P445-720px.jpg

DB25-02 Schematic.PNG

DB25-02 Pinout.PNG

DB25-02 Mechs.PNG

DB25-02 3D.png

DB-25 Mechs DBdMtg.png

Mechanicals/Enclosure

  • Board is designed to fit into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search

VFO-003 P1871 720px.jpg

ArduinoInABox Mechs.png

VFO-003 FrontPanel Holes.PNG

VFO-003 RearPanel Holes.PNG