|
|
Line 1: |
Line 1: |
− | [[file:WA3TFS_Upverter-720px.jpg]]
| |
| | | |
− | == Features ==
| |
− |
| |
− | SDR up-converter/receiver shifts low frequencies up by 100 MHz. Used to listen to HF frequencies on an inexpensive RTL-SDR module.
| |
− |
| |
− | * $55 at W3PIE hamfest
| |
− | * SBL-1 mixer
| |
− | * 100 MHz can oscillator
| |
− | * Low pass filter
| |
− | * [https://044640f.netsolhost.com/ 1 kHz to 1.7 GHz SDR Receiver] - WA3TFS Design
| |
− | ** [https://rest.edit.site/filestorage-api-service/23f1203e3bd4a6128459f208dcf16362/forkiin-sdr-qst-article.pdf?dl=1 QST Article]
| |
− | ** [https://static-cdn.edit.site/users-files/73eecae7c71adfad0f97a69e16be7203/sdr-wiring-diagram(3).pdf?dl=1 SDR wiring diagram]
| |
− | ** [https://static-cdn.edit.site/users-files/e5b0fbd1d917fc766cf2197693d69209/bill-of-material-sdr-rev-1-3.pdf?dl=1 Parts List]
| |
− | ** [https://static-cdn.edit.site/users-files/21f2eeabc8074f4bc64a7b350b8b52e1/pcb_r11.jpg?dl=1 Layout]
| |
− |
| |
− | === Schematic ===
| |
− |
| |
− | [[file:WA3TFS_Upverter_Schematic.PNG]]
| |
− |
| |
− | == Software ==
| |
− |
| |
− | * [https://www.rtl-sdr.com/ RTL-SDR]
| |
− | * [http://hdsdr.de/ HDSDR] - Easier to use
| |
− | * [https://airspy.com/download/ SDR Sharp] - Crashier
| |
− |
| |
− | == Build ==
| |
− |
| |
− | * Nice silver mica caps
| |
− | ** My kit was missing the center cap of the band filter (150 pF)
| |
− | * [https://www.minicircuits.com/pdfs/SBL-1+.pdf SBL-1 mixer]
| |
− | * 30pF cap installed in J_A to J_B marked 300
| |
− | * Build was tough due to very small pads on the PCB
| |
− | ** Particularly tough to solder ground pads
| |
− | ** Pad shapes were not round so less area to set soldering iron
| |
− | * Pin 1 orientations on the mixer and oscillator "backwards" from other board legends
| |
− | ** Pin 1 shown in red
| |
− | [[file:WA3TFS_Upverter_pcb_r11.jpg]]
| |
− |
| |
− | === Wiring ===
| |
− |
| |
− | [[file:WA3TFS_Upverter_Wiring.PNG]]
| |
− |
| |
− | == Enclosure ==
| |
− |
| |
− | * Board fits perfectly in
| |
− | ** [https://www.adafruit.com/product/2230 Extruded Aluminum Enclosure Box - 94mm x 83mm x 30mm]
| |
− | ** Card just perfectly matches
| |
− |
| |
− | [[file:Adafruit_2230-00.jpg]]
| |
− |
| |
− | [[file:2230-03.jpg]]
| |
− |
| |
− | == Videos by others ==
| |
− |
| |
− | <video type="youtube">XeQnDpzhcRo</video>
| |