Difference between revisions of "DIGIO32-I2C"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "File:DIGIO32-I2C-P232-720px.jpg == Features == == Connectors == == Schematic == [Schematic] == Testing == == Assembly Sheet == * DIGIO32-I2C Assembly Sheet ==") |
Blwikiadmin (talk | contribs) |
||
| Line 2: | Line 2: | ||
== Features == | == Features == | ||
| + | |||
| + | * 32-bit Digital I/O | ||
| + | * Two MCP23017 16-bit I2C I/O Expanders | ||
| + | * Strong library support for all major microprocessors (Arduino, Raspberry Pi, BeagleBone) | ||
| + | * GitHub repo for the DigIO32-I2C Card Arduino library | ||
| + | * EEPROM for board ID and application specific information | ||
| + | * Write Enable jumper protects EEPROM against accidental damage | ||
| + | * I/O Connector is inexpensive/standard DB-37 | ||
| + | * ODAS form factor (width is 95 mm) | ||
| + | * 6-32 Mounting holes Host connectors | ||
| + | * Daisy-chain I2C connector | ||
| + | * Address select jumper (2 addresses - can support up to 4 cards) | ||
| + | * Power connector (not required for minimal loads | ||
| + | * Supports 3.3V or 5V signal levels | ||
| + | * Fuse protected power output on DB-37 | ||
| + | * I2C Termination jumpers for end of I2C chain | ||
== Connectors == | == Connectors == | ||
Revision as of 16:32, 1 January 2020
Features
- 32-bit Digital I/O
- Two MCP23017 16-bit I2C I/O Expanders
- Strong library support for all major microprocessors (Arduino, Raspberry Pi, BeagleBone)
- GitHub repo for the DigIO32-I2C Card Arduino library
- EEPROM for board ID and application specific information
- Write Enable jumper protects EEPROM against accidental damage
- I/O Connector is inexpensive/standard DB-37
- ODAS form factor (width is 95 mm)
- 6-32 Mounting holes Host connectors
- Daisy-chain I2C connector
- Address select jumper (2 addresses - can support up to 4 cards)
- Power connector (not required for minimal loads
- Supports 3.3V or 5V signal levels
- Fuse protected power output on DB-37
- I2C Termination jumpers for end of I2C chain
Connectors
Schematic
[Schematic]
Testing
Assembly Sheet
- [[DIGIO32-I2C Assembly Sheet ==
