Difference between revisions of "DIGIO32-I2C"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
[[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/32-bit-digital-io-card-digio32-i2c/]] | [[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/32-bit-digital-io-card-digio32-i2c/]] | ||
| + | |||
| + | <video type="youtube">fiyauoZw_Y4</video> | ||
[[File:DIGIO32-I2C-P232-720px.jpg]] | [[File:DIGIO32-I2C-P232-720px.jpg]] | ||
Revision as of 11:47, 9 January 2020
Features
- 32-bit Digital I/O
- Two MCP23017 16-bit I2C I/O Expanders
- EEPROM for board ID and application specific information
- Write Enable jumper protects EEPROM against accidental damage
- I/O Connector is inexpensive/standard DB-37
- I2C Interface
- Daisy-chain I2C connector
- I2C Termination jumpers for end of I2C chain
- I2C Address select jumper (2 addresses - can support up to 4 cards)
- Power Options
- Supports 3.3V or 5V signal levels
- Fuse protected power output on DB-37
- Power connector (not required for minimal loads
- ODAS form factor (width is 95 mm)
- 6-32 Mounting holes
Connectors
DB-37 Pinout
Schematic
Drivers
- GitHub repo for the DigIO32-I2C Card Arduino Driver
- GitHub repo for the DigIO32-I2C Card Arduino examples
