Difference between revisions of "DRIVE50"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Test) |
Blwikiadmin (talk | contribs) |
||
| Line 3: | Line 3: | ||
== 50 Ohm Driver Card == | == 50 Ohm Driver Card == | ||
| + | * Line driver | ||
| + | * 50 or 75 Ohm output impedance | ||
* BNC or SMA connector | * BNC or SMA connector | ||
* 3.3V or 5V | * 3.3V or 5V | ||
Revision as of 15:02, 6 July 2022
50 Ohm Driver Card
- Line driver
- 50 or 75 Ohm output impedance
- BNC or SMA connector
- 3.3V or 5V
- 3-pin right angle 0.1" pitch input connector
Test
- Supply Vcc 3.3V to 5V and ground
- Input is pulled up to Vcc
- Measure output with BNC T
- Should be 1/2 of Vcc with 50 Ohm terminator
- Should be Vcc without terminator
Mechanicals
