DRIVE50

From Land Boards Wiki
Jump to navigation Jump to search

DRIVE50 FRONT 3D.png

50 Ohm Driver Card

  • Line driver
  • 50 or 75 Ohm output impedance
  • BNC or SMA connector
  • 3.3V or 5V
  • 3-pin right angle 0.1" pitch input connector

Test

  • Supply Vcc 3.3V to 5V and ground
  • Input is pulled up to Vcc
  • Measure output with BNC T
    • Should be 1/2 of Vcc with 50 Ohm terminator
    • Should be Vcc without terminator

Mechanicals

DRIVE50 MECHS REV1.PNG

Assembly Sheet