EP2C5-DB

From Land Boards Wiki
Jump to navigation Jump to search

Tindie-mediums.png

EP2C5-DB FPGA card

P1743-720PX.jpg

I love Grant Searle's Multicomp project. It lets you easily create 6502, Z80, 6809 Retrocomputers of the late 1970s era. This card provides all of the connections needed.

Grant's original design used an EP2 and that's exactly what this cards USES. Note that's not compatible with the latest version Altera/Intel Quartus but you can download older versions like 13.1 SP. Just make sure it supports the Cyclone II family of FPGAs. We also have an EP4 version of this card for sale on Tindie.

Features

  • Cyclone II EP2C5 Mini Dev Board
  • 6 bit video on VGA (2:2:2 R:G:B)
  • 128KB of SRAM for banked use in CP/M
  • PS/2 Keyboard Mini-DIN connector
  • Connector for serial ports
    • Can attach inexpensive FTDI USB to serial converter
  • SD Card
  • DC power jack (on FPGA card)

EP2 Resources

  • EP2CE5 had 13 of 1Kx9 SRAM blocks

EP2XX Resources.PNG

Stackup with FTDI Card

P1752-CROPPED-720PX.jpg

VGA - Ideal Drive 2:2:2 Case

  • FPGA has a 3.3V driver which can drive 8 mA
  • Ideal case drive current
    • 0.7V into 75 Ohms = 9.33 mA
  • R-2R values
  • Voltage steps are:

VGA Sim 2R Voltage.PNG

  • Current steps are:

VGA Sim 2R Current.PNG

Connectors

J1 - VGA

J4 - SD Card

J5 - Serial Ports 1/2

  • Connects to FTDI Module
  1. RTS
  2. RXD
  3. TXD
  4. GND

EP2C5-DB FTDI.PNG

FTDI Module

FTDI rot.jpg

FTDI Wiring

    • J5-1 (marked RTS on PCB) to FTDI CTS pin
    • J5-3 (marked RX on PCB) to FTDI TX pin
    • J5-5 (marked TX on PCB) to FTDI RX pin
    • J5-7 (marked GND on PCB) to FTDI GND pin

EP2C5-DB FTDI Wiring.PNG

J6 - 8-bit I/O connector

  • FPGA Pins
  1. 3.3V
  2. 3.3V
  3. 25
  4. 31
  5. 41
  6. 40
  7. 43
  8. 42
  9. 45
  10. 44
  11. GND
  12. GND

J8 - 8-bit I/O connector

  • FPGA Pins
  1. 3.3V
  2. 3.3V
  3. 48
  4. 47
  5. 52
  6. 51
  7. 58
  8. 55
  9. 76
  10. 69
  11. GND
  12. GND

Schematics

Multicomp Builds

Programming the Flash PROM Memory

Permanent (.pof file)

Program-permanent-720px.png

Temporary (.sof file)

Program-temporarily-720px.png

Pin List (Multicomp)

set_global_assignment -name FAMILY "Cyclone IV E"
set_global_assignment -name DEVICE EP4CE10E22C8
set_global_assignment -name TOP_LEVEL_ENTITY Microcomputer
set_global_assignment -name ORIGINAL_QUARTUS_VERSION "13.0 SP1"
set_global_assignment -name PROJECT_CREATION_TIME_DATE "17:55:48  OCTOBER 20, 2013"
set_global_assignment -name LAST_QUARTUS_VERSION "18.1.0 Lite Edition"
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
set_global_assignment -name DEVICE_FILTER_PACKAGE TQFP
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 144
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8
set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL"
# Clocks and reset
set_location_assignment PIN_17 -to clk
set_location_assignment PIN_144 -to n_reset
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to n_reset
# PS/2
set_location_assignment PIN_87 -to ps2Data
set_location_assignment PIN_86 -to ps2Clk
# ACIA (Serial)
set_location_assignment PIN_60 -to serSelect
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to serSelect
set_location_assignment PIN_104 -to urts1
set_location_assignment PIN_101 -to urxd1
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to rxd1
set_location_assignment PIN_103 -to utxd1
# External SRAM
set_location_assignment PIN_4 -to n_sRamWE
set_location_assignment PIN_126 -to n_sRamCS
set_location_assignment PIN_134 -to n_sRamOE
set_location_assignment PIN_32 -to sramAddress[16]
set_location_assignment PIN_8 -to sramAddress[15]
set_location_assignment PIN_30 -to sramAddress[14]
set_location_assignment PIN_24 -to sramAddress[13]
set_location_assignment PIN_28 -to sramAddress[12]
set_location_assignment PIN_136 -to sramAddress[11]
set_location_assignment PIN_132 -to sramAddress[10]
set_location_assignment PIN_139 -to sramAddress[9]
set_location_assignment PIN_142 -to sramAddress[8]
set_location_assignment PIN_143 -to sramAddress[7]
set_location_assignment PIN_141 -to sramAddress[6]
set_location_assignment PIN_137 -to sramAddress[5]
set_location_assignment PIN_135 -to sramAddress[4]
set_location_assignment PIN_133 -to sramAddress[3]
set_location_assignment PIN_129 -to sramAddress[2]
set_location_assignment PIN_125 -to sramAddress[1]
set_location_assignment PIN_121 -to sramAddress[0]
set_location_assignment PIN_122 -to sramData[7]
set_location_assignment PIN_120 -to sramData[6]
set_location_assignment PIN_118 -to sramData[5]
set_location_assignment PIN_114 -to sramData[4]
set_location_assignment PIN_112 -to sramData[3]
set_location_assignment PIN_113 -to sramData[2]
set_location_assignment PIN_115 -to sramData[1]
set_location_assignment PIN_119 -to sramData[0]
# Composite Video
set_location_assignment PIN_75 -to video
set_location_assignment PIN_74 -to videoSync
# VGA
set_location_assignment PIN_64 -to videoB0
set_location_assignment PIN_63 -to videoB1
set_location_assignment PIN_67 -to videoG0
set_location_assignment PIN_65 -to videoG1
set_location_assignment PIN_70 -to videoR0
set_location_assignment PIN_69 -to videoR1
set_location_assignment PIN_71 -to hSync
set_location_assignment PIN_72 -to vSync
# SD Card
set_location_assignment PIN_92 -to sdMISO
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sdMISO
set_location_assignment PIN_94 -to sdSCLK
set_location_assignment PIN_93 -to sdMOSI
set_location_assignment PIN_97 -to sdCS
set_location_assignment PIN_3 -to driveLED
# LED
set_location_assignment PIN_E4 -to driveLED
# J6 IO
set_location_assignment PIN_25 -to J6IO8[0]
set_location_assignment PIN_31 -to J6IO8[1]
set_location_assignment PIN_41 -to J6IO8[2]
set_location_assignment PIN_40 -to J6IO8[3]
set_location_assignment PIN_43 -to J6IO8[4]
set_location_assignment PIN_42 -to J6IO8[5]
set_location_assignment PIN_45 -to J6IO8[6]
set_location_assignment PIN_44 -to J6IO8[7]
# J8 I/O
set_location_assignment PIN_48 -to J8IO8[0]
set_location_assignment PIN_47 -to J8IO8[1]
set_location_assignment PIN_52 -to J8IO8[2]
set_location_assignment PIN_51 -to J8IO8[3]
set_location_assignment PIN_58 -to J8IO8[4]
set_location_assignment PIN_55 -to J8IO8[5]
set_location_assignment PIN_76 -to J8IO8[6]
# set_location_assignment PIN_60 -to J8IO8[7]

EP2C5-DB Assembly Sheet