ER-ADSR-555-01 Rev 1 Assembly Sheet

From Land Boards Wiki
Revision as of 13:58, 6 November 2022 by Blwikiadmin (talk | contribs) (→‎Parts List)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

ER-ADSR-555-01 SET P1080636-720px.jpg

ER-ADSR-555-01-controls FRONT REAR CAD-720PX.png

Parts List

  • Rework Instructions - Do cuts before installing parts
  • C3 mounted on rear (too tall for front, also easier to test other time constants)

ER-ADSR-555-01 SET P1080633-rwk-720px.jpg

Find Qty Ref Des Part Number Find Qty Ref Des Part Number
1 4 R1, R5, R11, R12 10K 13 3 RV1, RV2, RV4 A1M
2 1 R2 22K 14 1 RV3 B10K
3 4 R3, R4, R6, R9 4.7K 15 1 J1 Conn_02x05
4 1 R7 RA (100) 16 2 J2, J3 PJ301BM
5 1 R8 RD (100) 17 1 U1 TL072
6 1 R10 RR (100) 18 1 U2 NE555N
7 5 D1-D5 1N4148 19 1 D6 LED, 5MM
8 2 U1, U2 SOCKET, IC, 8 PIN
9 1 C1 10nF, 2.54MM PITCH
10 1 C2 10uF, 2.54MM PITCH
11 1 C3 1uF, 2.54MM PITCH
12 3 Q1, Q2, Q3 2N3904

Notes

  • Two PCB set
    • Front panel
    • Controls/analog card
  • Parts are in order of installation
    • Lowest first
  • Resistor footprints are for 1/8W resistors but can fit 1/4W resistors
  • Use Front Panel to align pots/connectors
  • LED standing up and through panel