Difference between revisions of "ER-GATE-SEQ-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 69: | Line 69: | ||
* [[ER-PROTO-02]] | * [[ER-PROTO-02]] | ||
| − | ** Cut out at RV6 for GATE IN on Controls card | + | ** Controls card |
| − | * [[Arduino Pro Mini]] - with ATMega328 | + | *** J1-J6 are OUT1-OUT6 |
| + | *** Cut out at RV6 for GATE IN on Controls card | ||
| + | *** RV5 is Rotary Encoder | ||
| + | *** RV3 has switch contacts | ||
| + | * Logic card | ||
| + | ** [[Arduino Pro Mini]] - with ATMega328 | ||
=== Daughtercard Prototyping Area === | === Daughtercard Prototyping Area === | ||
Revision as of 21:25, 4 January 2023
Contents
Features
- GATE Sequencer
- Based on HAGIWO Euclidean rhythm sequencer
- OLED Display: 128*64 size
- Rotary Encoder: Parameter Selection
- PUSH Button: Parameter Change/Determination
- Trigger Output: 6CH (0-5V) Trigger Input: 1CH (0-5V)
HAGIWO Design
HAGIWO Menu System
- Rotary Encoder: Parameter Selection
- PUSH Button: Parameter Change/Determination
- Menus are not well described on HAGIWOs page - observations
- 6 Parameters - Arrow points to current channel/option
- 1-6, R: Select channel 1-6 (upper right, top row), Random
- H: Hits (Upper right, middle row) - Number of points
- O: Offset (Upper right, bottom row)
- L: Limit (lower left, top row) - number of steps
- M: Mute channel (lower left, middle row)
- R: Reset (lower left, bottom row)
Prototype Build
Arduino Sensor Shield
- Arduino UNO
- Arduino Sensor Shield
Rotary Encoder
- Rotary Encoder
- Pinout
- G
- V
- B
- A
- Switch
- Viewed from bottom
GVS Switch
SCF-2 - Jacks
- SCF-2 - Jacks
- One card populated with 1 3.5mm jack
- 3 cards populated with 2 jacks
Build on ER-PROTO-02 Card
- ER-PROTO-02
- Controls card
- J1-J6 are OUT1-OUT6
- Cut out at RV6 for GATE IN on Controls card
- RV5 is Rotary Encoder
- RV3 has switch contacts
- Controls card
- Logic card
- Arduino Pro Mini - with ATMega328
Daughtercard Prototyping Area
