Difference between revisions of "ER-GATE-SEQ-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 89: | Line 89: | ||
[[FILE:ER-PROTO-02-ER-GATE-SEQ-01_CTLS_FRONT_CAD.PNG]] | [[FILE:ER-PROTO-02-ER-GATE-SEQ-01_CTLS_FRONT_CAD.PNG]] | ||
+ | |||
+ | * Jacks connections | ||
[[FILE:ER-PROTO-02-ER-GATE-SEQ-01_SCHEM_J1-7.PNG]] | [[FILE:ER-PROTO-02-ER-GATE-SEQ-01_SCHEM_J1-7.PNG]] | ||
+ | |||
+ | * Pots connections | ||
[[FILE:ER-PROTO-02-ER-GATE-SEQ-01_SCHEM_J8.PNG]] | [[FILE:ER-PROTO-02-ER-GATE-SEQ-01_SCHEM_J8.PNG]] |
Revision as of 13:33, 5 January 2023
Contents
Features
- GATE Sequencer
- Based on HAGIWO Euclidean rhythm sequencer
- OLED Display: 128*64 size
- Rotary Encoder: Parameter Selection
- PUSH Button: Parameter Change/Determination
- Trigger Output: 6CH (0-5V) Trigger Input: 1CH (0-5V)
HAGIWO Design
HAGIWO Menu System
- Rotary Encoder: Parameter Selection
- PUSH Button: Parameter Change/Determination
- 6 Parameters - Arrow points to current channel/option
- 1-6, R: Select channel 1-6 (upper right, top row), Random
- H: Hits (Upper right, middle row) - Number of points
- Number of outputs out of 16 steps
- O: Offset (Upper right, bottom row)
- Shift the start of the rhythm by offsetting LIMIT
- Return to the first step when there is a trigger input for the number of times the set value is set
- For example, if you set it to 5, it will return to the first step after outputting 1~5 steps. It can be used in a polyrhythmic way
- L: Limit (lower left, top row) - number of steps
- M: Mute channel (lower left, middle row)
- Eliminates the trigger output of the selected CH.
- R: Reset (lower left, bottom row)
- Press the button to return the playback step of all channels to the first step
Prototype Build
Arduino Sensor Shield
- Arduino UNO
- Arduino Sensor Shield
Rotary Encoder
- Rotary Encoder
- Pinout
- G
- V
- B
- A
- Switch
- Viewed from bottom
GVS Switch
SCF-2 - Jacks
- SCF-2 - Jacks
- One card populated with 1 3.5mm jack
- 3 cards populated with 2 jacks
Build on ER-PROTO-02 Card
Front Panel
- OLED mounts over RV1-RV4
- Cut bigger hole for OLED connector
Controls card
- J1-J6 are OUT1-OUT6
- Series output resistors for jacks on card
- RV6 is Rotary Encoder
- RV4 has Rotary Encoder switch contacts
- Cut out at RV5 for GATE IN on Controls card
- Jacks connections
- Pots connections
Logic card
- Arduino Pro Mini - with ATMega328