ER-PROTO-01

From Land Boards Wiki
Jump to navigation Jump to search

ER-PROTO-PANEL-01-SET FRONT REAR-3D-720px.png

Features

  • Eurorack Prototyping card set
  • 6 HP wide (30mm) front panel
  • 3U tall
  • Three card set
    • Board interconnect headers duplicated on headers
    • 30mm wide front panel
    • 28mm wide panel and daughtercards
  • 6 POTS
    • Marked as RV1-RV5
    • Series resistors on pot wiper
    • All 3 pot pins brought to top header
  • 4 Jacks
    • Marked as J1-J4
    • Tip/sleeve brought to header near middle/bottom
  • Pots on top, jacks on bottom of card
    • Easier to adjust pots without bumping into pots
    • Pots more often accessed than jacks
  • Large prototyping area
    • 58 nodes with 3 holes per node (29 per "side")
  • +12V, -12V down board edges
  • 5V/GND down center of card
  • Bussed connections horizontally
  • Front Panel with generic labels
    • Cover with White on Black P-Touch labels

Connectors

  • J1-J4 are front panel connectors

Inter-card Connectors

  • J5 is on both Controls and J5 is on the I/O card

ER-PROTO-CTLS-6-01 J5.PNG

  • J6 on the controls card is J37 on the I/O card

ER-PROTO-CTLS-6-01 J10.PNG

Example

  • Arduino NANO with quad Opamp example

ER-PROTO-DB-01 ARDUINO NANO OPAMP-720px.png