ER-VCA2-01

From Land Boards Wiki
Revision as of 20:48, 19 November 2022 by Blwikiadmin (talk | contribs)
Jump to navigation Jump to search

ER-VCA2-01 P1080781-720px.JPG

Features

Connectors

J1 - Daughtercard Pots

ER-VCA2-01-DB J1.PNG

  • POT1 = RV1 = Modulation Adjust Channel 1
  • POT2 = RV2 = Modulation Adjust Channel 2

J2 - Daughtercard Eurorack Power

ER-VCA2-01-DB J2.PNG

J3 - Daughtercard Control Card Jacks

ER-VCA2-01-DB J3.PNG

  • Controls card J3 = OUT1 (bottom left jack)
  • Controls card J4 = OUT2 (bottom right jack)
  • Controls card J5 = MOD1 (middle left jack)
  • Controls card J6 = MOD2 (middle right jack)
  • Controls card J7 = IN1 (top left jack)
  • Controls card J8 = IN2 (top right jack)

Reference

Video

Checkout

Rev 1

  • Headers between cards do not line up
    • Fix on Controls card
      • Make Rev 2 Controls card
      • Move down bottom header J2 to match daughtercard
    • Cut off 0.1" of controls card using vice/hacksaw
    • Use female headers on bottom of daughtercard
    • Use right angle pin header pins to connect to pads (remove plastic)

ER-VCA2-01-CTRLS CONN RWK.png

Assembly Sheet