Difference between revisions of "ESP-32-VGA Rev 1 Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 5: | Line 5: | ||
== Parts List == | == Parts List == | ||
+ | |||
+ | |||
* [[ESP32-VGA#ESP-32_Module|ESP32 Module]] is marked on bottom "ESP32 DEVKITV1" | * [[ESP32-VGA#ESP-32_Module|ESP32 Module]] is marked on bottom "ESP32 DEVKITV1" | ||
Line 23: | Line 25: | ||
| | | | ||
| 1 | | 1 | ||
− | | Conn, 1x3 | + | | [[ESP-32-VGA_Rev_1_Assembly_Sheet#Sourcing_Headers.2FPins|Conn, 1x3]] |
| H1 | | H1 | ||
|- | |- | ||
Line 31: | Line 33: | ||
| | | | ||
| 1 | | 1 | ||
− | | Conn, 2x4 | + | | [[ESP-32-VGA_Rev_1_Assembly_Sheet#Sourcing_Headers.2FPins|Conn, 2x4]] |
| H2 | | H2 | ||
|- | |- | ||
Line 39: | Line 41: | ||
| | | | ||
| 1 | | 1 | ||
− | | Conn, 1x2 | + | | [[ESP-32-VGA_Rev_1_Assembly_Sheet#Sourcing_Headers.2FPins|Conn, 1x2]] |
| J15 | | J15 | ||
|- | |- | ||
Line 55: | Line 57: | ||
| | | | ||
| 2 | | 2 | ||
− | | Conn, 1x6, Rt ang, FTDI | + | | [[ESP-32-VGA_Rev_1_Assembly_Sheet#Sourcing_Headers.2FPins|Conn, 1x6, Rt ang, FTDI]] |
| J2,J6 | | J2,J6 | ||
|- | |- | ||
Line 87: | Line 89: | ||
| | | | ||
| 1 | | 1 | ||
− | | Conn, 1x8 | + | | [[ESP-32-VGA_Rev_1_Assembly_Sheet#Sourcing_Headers.2FPins|Conn, 1x8]] |
| P4 | | P4 | ||
|- | |- | ||
Line 95: | Line 97: | ||
| | | | ||
| 1 | | 1 | ||
− | | Conn, 2x8 | + | | [[ESP-32-VGA_Rev_1_Assembly_Sheet#Sourcing_Headers.2FPins|Conn, 2x8]] |
| P2 | | P2 | ||
|- | |- |
Revision as of 18:00, 2 February 2020
Contents
kk
ll
Parts List
- ESP32 Module is marked on bottom "ESP32 DEVKITV1"
- 0805 resistors are standard parts
Qty | Value | RefDes | Qty | Value | RefDes | |
---|---|---|---|---|---|---|
5 | 0.1uF (0805) | C1,C2,C4-C6 | 1 | Conn, 1x3 | H1 | |
2 | 10uF (1206) | C3,C7 | 1 | Conn, 2x4 | H2 | |
1 | Polyfuse_Small (1206) | F1 | 1 | Conn, 1x2 | J15 | |
1 | 150 (0805) | R12 | 1 | Jack, DC, 5.5mm x 2.1mm | J1 | |
4 | 270 (0805) | R1,R3,R5,R11 | 2 | Conn, 1x6, Rt ang, FTDI | J2,J6 | |
6 | 470 (0805) | R7-R10,R13,R14 | 1 | PS2_DIN6 Purple (Keyboard) | J3 | |
3 | 560 (0805) | R2,R4,R6 | 1 | PS2_DIN6 Green (Mouse) | J4 | |
1 | AP1117-3.3V | U2 | 1 | RCA-JACK | J5 | |
1 | TXS0104EDR | U3 | 1 | Conn, 1x8 | P4 | |
2 | ESP32 Headers (1x15) | U1 | 1 | Conn, 2x8 | P2 | |
1 | ESP32 | U1 | 1 | DB15HD, Blue, VGA | P3 |
Sourcing Headers/Pins
- Pin headers/pin sockets
- "Standard" length is 1x40 or 2x40 pins
- Cheaper to buy 1x40 or 2x40 and cut off extra pins
- Ebay - 1x40 Header pins/sockets
- Female connectors are expensive on Mouser, Ebay has good choices
- Mouser 1x40 pin straight headers
- Mouser 1x40 right angle pin headers
- Mouser 2x40 right angle pin headers
- "Standard" length is 1x40 or 2x40 pins