Difference between revisions of "Eurorack Panel Jacks"

From Land Boards Wiki
Jump to navigation Jump to search
 
(42 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Eurorack Panel Jacks ==
+
== Heights from board surface ==
  
 
* Heights
 
* Heights
 
** PJ-3410BM Mono Jack = 10.5mm
 
** PJ-3410BM Mono Jack = 10.5mm
 
** PJ-392 Mono Jack = 11.8mm
 
** PJ-392 Mono Jack = 11.8mm
 +
** PJ-398SM Mono Jack = 9mm
 +
** PJ-366ST Stereo Jack = 9mm
 +
** A-6115 Stereo Jack = 9mm
 
** PJ-3410 Stereo Jack = 13mm
 
** PJ-3410 Stereo Jack = 13mm
** DIN-5 SD-50BV MIDI Jack = 16mm
+
** DIN-5 SD-50BV MIDI Jack = 15.8mm
 +
 
 +
== Vertical Mounted 3.5mm Panel Jacks ==
  
 
=== PJ-3410BM Mono Jack ===
 
=== PJ-3410BM Mono Jack ===
 +
 +
[[FILE:PJ-3410BM_vactrol_knob_pot-001_sm.jpg]]
 +
 +
* '''Note that the center of the jack is offset from the mounting pins'''
 +
** Many sites show the wrong footprint/offset which would lead to errors in lining up the hole
 +
*** They sell the PJ-3410BM but show the PJ-3410B footprint
 +
 +
* [https://www.thonk.co.uk/shop/3-5mm-jacks/ PJ-3410BM on Thonk]
  
 
[[file:PJ-3410BM_Mono_Panel_Jack.PNG]]
 
[[file:PJ-3410BM_Mono_Panel_Jack.PNG]]
 +
 +
=== PJ-398SM Mono Jack ===
 +
 +
* [https://www.thonk.co.uk/shop/3-5mm-jacks/ PJ-398SM on Thonk]
 +
* Sleeve, tip, switch on tip
 +
* FROM NOW ON PLEASE PURCHASE PJ398SM below for THONKICONN (INSTEAD OF PJ301M-12)
 +
* Note on [https://www.davidhaillant.com/mfos-soundlab-minisynth-in-smt/ MFOS Sound Lab Mini-Synth in SMT]
 +
<pre>
 +
Last “mistake”, I used the Erthenvar Jack footprints for the 4 Jack connectors.
 +
Those Jacks connectors are fine. In fact, I use them often. But I misjudged their height,
 +
compared to other control components, pots and switches. “Erthenvar Jacks” (WQP-PJ301BM is 11.5mm height,
 +
where other components are 10mm height.
 +
The right alternative is WQP-PJ398SM.
 +
To use them instead, you need to bend the ground pin and add a bit of wire to join the PCB ground pad.
 +
</pre>
 +
 +
[[file:thonkiconn-pj398sm.jpg]]
  
 
=== PJ-392 Mono Jack ===
 
=== PJ-392 Mono Jack ===
  
 
[[file:PJ-392.png]]
 
[[file:PJ-392.png]]
 +
 +
=== PJ-366ST Stereo Jack ===
 +
 +
* [https://www.thonk.co.uk/shop/3-5mm-jacks/ PJ-366ST on Thonk]
 +
* Same as [https://www.aliexpress.us/item/3256804061933030.html?spm=a2g0o.productlist.main.5.24f12f04ow83ar&algo_pvid=3e5230b4-9f1a-4621-9517-d09a734e7706&algo_exp_id=3e5230b4-9f1a-4621-9517-d09a734e7706-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000028516858642%22%7D&pdp_npi=2%40dis%21USD%2130.0%2130.0%21%21%21%21%21%4021227a0f16663521052816002d078c%2112000028516858642%21sea&curPageLogUid=UqrL59NyolCx WQP-WQP419GR on AliExpress]
 +
* [http://www.qingpu-electronics.com/en/products/WQP-PJ366ST-364.html Original mfg of WQP-WQP419GR] - $30 + $11.80 for 100 pcs
 +
 +
[[file:PJ-366ST_Stereo-Thonkiconn-Datasheetimage.jpg]]
 +
 +
[[file:PJ-366ST_Stereo-Thonkiconn-Mono-vs-Stereo.jpg]]
 +
 +
=== Tayda A-6115 Stereo Jack ===
 +
 +
[[file:Tayda_Stereo_Vertical_A-6115_footprint.PNG]]
  
 
=== PJ-3410 Stereo Jack ===
 
=== PJ-3410 Stereo Jack ===
 +
 +
* [https://www.thonk.co.uk/shop/pj3410/ PJ-3410 PN Thonk]
  
 
[[file:PJ3410_BIG.png]]
 
[[file:PJ3410_BIG.png]]
 +
 +
== MIDI Connectors ==
  
 
=== DIN-5 SD-50BV MIDI Jack ===
 
=== DIN-5 SD-50BV MIDI Jack ===
Line 24: Line 72:
  
 
[[FILE:DIN-5_SD-50BV_PCB.PNG]]
 
[[FILE:DIN-5_SD-50BV_PCB.PNG]]
 +
 +
== Horizontal Mounted Connectors ==
 +
 +
* MIDI Connector
 +
 +
=== DIN-5 MIDI Connector Female Right Angle ===
 +
 +
* [https://www.taydaelectronics.com/connectors-sockets/midi-connectors/5-pin-midi-connector-female-right-angle.html Tayda A-1010]
 +
* Mfg P/N: TEDIN-D501
 +
 +
[[FILE:DIN-5_TAYDA_TEDIN-D501_FOOTPRINT.PNG]]
 +
 +
== KiCad Footprints ==
 +
 +
* [https://github.com/clacktronics/AudioJacks Clacktronics GitHub]
 +
* [https://github.com/wntrblm/winterbloom_kicad_library Winterbloom Kicad Library]
 +
 +
== Suppliers ==
 +
 +
* [https://winterbloom.com/shop/eurorack-jacks winterbloom] - Thonk jacks, $0.50
 +
* [https://www.thonk.co.uk/product-category/parts/jacks/ Thonk]
 +
* [https://store.synthrotek.com/Jacks-and-Connectors_c_58.html Synthrotek]

Latest revision as of 22:44, 14 February 2023

Heights from board surface

  • Heights
    • PJ-3410BM Mono Jack = 10.5mm
    • PJ-392 Mono Jack = 11.8mm
    • PJ-398SM Mono Jack = 9mm
    • PJ-366ST Stereo Jack = 9mm
    • A-6115 Stereo Jack = 9mm
    • PJ-3410 Stereo Jack = 13mm
    • DIN-5 SD-50BV MIDI Jack = 15.8mm

Vertical Mounted 3.5mm Panel Jacks

PJ-3410BM Mono Jack

PJ-3410BM vactrol knob pot-001 sm.jpg

  • Note that the center of the jack is offset from the mounting pins
    • Many sites show the wrong footprint/offset which would lead to errors in lining up the hole
      • They sell the PJ-3410BM but show the PJ-3410B footprint

PJ-3410BM Mono Panel Jack.PNG

PJ-398SM Mono Jack

Last “mistake”, I used the Erthenvar Jack footprints for the 4 Jack connectors. 
Those Jacks connectors are fine. In fact, I use them often. But I misjudged their height, 
compared to other control components, pots and switches. “Erthenvar Jacks” (WQP-PJ301BM is 11.5mm height,
 where other components are 10mm height.
The right alternative is WQP-PJ398SM. 
To use them instead, you need to bend the ground pin and add a bit of wire to join the PCB ground pad.

Thonkiconn-pj398sm.jpg

PJ-392 Mono Jack

PJ-392.png

PJ-366ST Stereo Jack

PJ-366ST Stereo-Thonkiconn-Datasheetimage.jpg

PJ-366ST Stereo-Thonkiconn-Mono-vs-Stereo.jpg

Tayda A-6115 Stereo Jack

Tayda Stereo Vertical A-6115 footprint.PNG

PJ-3410 Stereo Jack

PJ3410 BIG.png

MIDI Connectors

DIN-5 SD-50BV MIDI Jack

DIN-5 SD-50BV.PNG

DIN-5 SD-50BV PCB.PNG

Horizontal Mounted Connectors

  • MIDI Connector

DIN-5 MIDI Connector Female Right Angle

DIN-5 TAYDA TEDIN-D501 FOOTPRINT.PNG

KiCad Footprints

Suppliers