Eurorack Panel Jacks

From Land Boards Wiki
Revision as of 22:44, 14 February 2023 by Blwikiadmin (talk | contribs) (→‎Suppliers)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Heights from board surface

  • Heights
    • PJ-3410BM Mono Jack = 10.5mm
    • PJ-392 Mono Jack = 11.8mm
    • PJ-398SM Mono Jack = 9mm
    • PJ-366ST Stereo Jack = 9mm
    • A-6115 Stereo Jack = 9mm
    • PJ-3410 Stereo Jack = 13mm
    • DIN-5 SD-50BV MIDI Jack = 15.8mm

Vertical Mounted 3.5mm Panel Jacks

PJ-3410BM Mono Jack

PJ-3410BM vactrol knob pot-001 sm.jpg

  • Note that the center of the jack is offset from the mounting pins
    • Many sites show the wrong footprint/offset which would lead to errors in lining up the hole
      • They sell the PJ-3410BM but show the PJ-3410B footprint

PJ-3410BM Mono Panel Jack.PNG

PJ-398SM Mono Jack

Last “mistake”, I used the Erthenvar Jack footprints for the 4 Jack connectors. 
Those Jacks connectors are fine. In fact, I use them often. But I misjudged their height, 
compared to other control components, pots and switches. “Erthenvar Jacks” (WQP-PJ301BM is 11.5mm height,
 where other components are 10mm height.
The right alternative is WQP-PJ398SM. 
To use them instead, you need to bend the ground pin and add a bit of wire to join the PCB ground pad.

Thonkiconn-pj398sm.jpg

PJ-392 Mono Jack

PJ-392.png

PJ-366ST Stereo Jack

PJ-366ST Stereo-Thonkiconn-Datasheetimage.jpg

PJ-366ST Stereo-Thonkiconn-Mono-vs-Stereo.jpg

Tayda A-6115 Stereo Jack

Tayda Stereo Vertical A-6115 footprint.PNG

PJ-3410 Stereo Jack

PJ3410 BIG.png

MIDI Connectors

DIN-5 SD-50BV MIDI Jack

DIN-5 SD-50BV.PNG

DIN-5 SD-50BV PCB.PNG

Horizontal Mounted Connectors

  • MIDI Connector

DIN-5 MIDI Connector Female Right Angle

DIN-5 TAYDA TEDIN-D501 FOOTPRINT.PNG

KiCad Footprints

Suppliers