Difference between revisions of "Extend IOP16 minimal example"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 2: | Line 2: | ||
* This is a guide to extending the IOP16 by adding [[IOP16_Peripheral_Support|IOP16 Peripherals]] to the minimal design | * This is a guide to extending the IOP16 by adding [[IOP16_Peripheral_Support|IOP16 Peripherals]] to the minimal design | ||
| − | * | + | * This is not the same as [[Embed_IOP16|Embedding the IOP16 into another design]] |
* This guide requires general familiarity with [[IOP16_16-bit_I/O_CPU_Design|IOP16 16-bit I/O CPU Design]] | * This guide requires general familiarity with [[IOP16_16-bit_I/O_CPU_Design|IOP16 16-bit I/O CPU Design]] | ||
Revision as of 10:00, 11 April 2022
Contents
Overview
- This is a guide to extending the IOP16 by adding IOP16 Peripherals to the minimal design
- This is not the same as Embedding the IOP16 into another design
- This guide requires general familiarity with IOP16 16-bit I/O CPU Design
Steps
- Copy baseline design
- Select/add peripherals
- Create new peripherals
- Write assembly code
Baseline Design
- Starts from IOP example
- Similar to Arduino "Blink Sketch" and uses
- Timer Unit 0 1 second timer
- On-board LED
- Similar to Arduino "Blink Sketch" and uses
