Difference between revisions of "Extend IOP16 minimal example"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 20: | Line 20: | ||
** The Timer unit could be removed if desired | ** The Timer unit could be removed if desired | ||
*** Timer makes Blink easier | *** Timer makes Blink easier | ||
| + | * Copy [https://github.com/douggilliland/IOP16/tree/main/Higher_Level_Examples/TestIOP16_Minimal|the minimal design] to a new folder | ||
= Select Peripherals = | = Select Peripherals = | ||
Revision as of 10:29, 11 April 2022
Contents
Overview
- This is a guide to extending the IOP16 by adding IOP16 Peripherals to the minimal design
- This is not the same as Embedding the IOP16 into another design
- This guide requires general familiarity with IOP16 16-bit I/O CPU Design
Steps
- Copy baseline design
- Select/add peripherals
- Create new peripherals
- Write assembly code
Baseline Design
- Starts from IOP example
- Similar to Arduino "Blink Sketch" and uses the resources
- Timer Unit 0 1 second timer
- On-board LED
- The Timer unit could be removed if desired
- Timer makes Blink easier
- Similar to Arduino "Blink Sketch" and uses the resources
- Copy minimal design to a new folder
