Difference between revisions of "FTDI-49MM"

From Land Boards Wiki
Jump to navigation Jump to search
Line 3: Line 3:
 
== Features ==
 
== Features ==
  
* [https://www.ftdichip.com/Products/ICs/FT230X.html FT230X] USB-to-FTDI Serial
+
* [https://www.ftdichip.com/Products/ICs/FT230X.html FT230X] USB-to-FTDI Serial IC
 
* USB B connector (not micro or mini, but the beefy USB B connector)
 
* USB B connector (not micro or mini, but the beefy USB B connector)
 
* FTDI compatible pinout
 
* FTDI compatible pinout

Revision as of 11:08, 2 October 2020

FTDI-P1746-CROPPED-720PX.jpg

Features

  • FT230X USB-to-FTDI Serial IC
  • USB B connector (not micro or mini, but the beefy USB B connector)
  • FTDI compatible pinout
  • 3.3V or 5V selection jumper
  • Header for 5V power distribution
  • Rx and Tx LEDs
  • (4) 4-40 mounting holes
    • Mounts to 95mm to 45mm adapter
    • Stacks up with standoffs for use with other 95mm cards

Stackup with EP2 FPGA card

  • Top to bottom of stackup
  1. EP2C5-DB
  2. Cyclone_II_EP2C5_Mini_Dev_Board Card
  3. FTDI-49MM - (this card)
  4. CARRIER95TO49MM

P1752-CROPPED-720PX.jpg

Pinout

  1. GND
  2. CTS* (in)
  3. VCC
  4. TX (out)
  5. RX (in)
  6. RTS* (out)

Assembly Sheet

FTDI-49MM Assembly Sheet