Difference between revisions of "Front Panel Assembly Sheet Rev 1"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Notes) |
Blwikiadmin (talk | contribs) |
||
Line 37: | Line 37: | ||
|- | |- | ||
| 32 | | 32 | ||
− | | | + | | SW, Pushbutton, 6mm (Note 4) (Front) |
| SW0-SW31 | | SW0-SW31 | ||
| | | |
Latest revision as of 15:53, 20 June 2021
Parts List / Assembly Order
Qty | Value | RefDes | Qty | Value | RefDes | |
---|---|---|---|---|---|---|
4 | 10K, 0805 (Rear) | R33, R36-R38 | 32 | LED, 5mm (NOTE 3) (Front) | DS0-DS31 | |
32 | 1K, 0805 (NOTE 1) (Rear) | R1-R32 | 1 | HEADER, RT ANG, 1x2 (Rear) | J1 | |
3 | 2.2K, 0805 (NOTE 2) (Rear) | R34-R36 | 1 | HEADER, RT ANG, 1x5 (Rear) | J2 | |
32 | SW, Pushbutton, 6mm (Note 4) (Front) | SW0-SW31 | 1 | HEADER, RT ANG, 1X4 (Rear) | J3 | |
4 | MCP23017-E/SS (Front) | U1-U4 | 1 | HEADER, RT ANG, 2X2 (Rear) | J4 |
Notes
- Note 1 - 1K ballast LED resistors. Pick value for how bright you want LEDs at your operating voltage.
- Note 2 - R34 and R35 are 2.2K I2C terminators. Needed for 3.3V operation and 400 KHz operation. R36 is INT* pullup.
- Note 3 - LEDs - I like diffused Orange LEDs. I don't like clear LEDs.
- Note 4 - Pick the height you like. I like 6mm high. You might like taller if you use keycaps.