Difference between revisions of "GPS Frequency Standard"

From Land Boards Wiki
Jump to navigation Jump to search
Line 59: Line 59:
  
 
[[File:GPS_NEO-7M-03.PNG]]
 
[[File:GPS_NEO-7M-03.PNG]]
 
== OLED Display ==
 
 
=== Description ===
 
 
* OLED display, no need backlight, self-illumination.
 
* The display performance is better than the traditional LCD display, also lower consumption.
 
 
=== Specifications ===
 
 
* Driver IC: SSD1306
 
* Size: 0.91 inch OLED
 
* Resolution: 128 x 32
 
* Size: 38 * 12 mm
 
* Number of pins: 4 Pin
 
* Interface Type: IIC interface
 
* Display Color: White
 
* Operating temperature:-40 ~ 85 ℃
 
 
=== I2C Pin Out ===
 
 
# GND: Power Ground
 
# VCC: Power + (DC 3.3 ~5v)
 
# SCL: Clock Line
 
# SDA: Data Line
 
 
[[File:OLED-128x32.jpg]]
 
  
 
== Reference Materials ==
 
== Reference Materials ==

Revision as of 16:10, 26 June 2022

Build V2

Stand-alone design does not require PC

Wiring

# Wiring
# Signal   Color  From          To
# GND      Black  QTPy49 J4-1   GPS pin 4
# VCC      Red    QTPy49 J4-2   GPS pin 5
# QTPy>GPS Blue   QTPy49 J4-3   GPS pin 2
# GPS>QTPy White  QTPy49 J4-4   GPS pin 3
# GND      Black  QTPy49 J5-1   PulseGen GND
# VCC      Red    QTPy49 J5-2   PulseGen VCC
# PPS      Purple GPU pin 1     PulseGen In
# LED-VCC  Red    QTPy49 J9-3   D0
# LED-GND  Black  QTPy49 J9-1   GND

Code

  • GPS_004.py - Final working code
    • Saved as code.py to auto-run
  • GPS_003.py - Capture data from GPS module a line at a time - helpful for debugging
  • GPS_002.py - Read 32 bytes at a time
  • GPS_001.py - Formatted stings output

Build V1

Requires PC running ublox software on PC to set output.

  • NEO-7M GPS
  • FTDI-49MM card set to 3.3V signal levels
  • PulseGen modified to receive output from GPS and drive 50 Ohm output out of the box
  • Fits into Aluminum Project Box Enclosure DIY 100*76*35mm - ebay search

GPS

  • GPS Satellite Positioning Module NEO7M UBLOX
  • Specifications:
  • Working Voltage: 3.3v-5.0v
  • Color: As Picture Shown
  • Description:
  • With micro USB interface, you can debug GPS module with ordinary phone data cable, no longer need to use USB-TTL and other tools.
  • TTL interface is reserved to facilitate the use of USB-TTL or external microcontroller to control and receive GPS information.
  • Ceramic antenna on module board, no GPS external antenna can be used to search for stars.
  • Reserved SMA antenna interface, can use external antenna, star search ability is stronger.

GPS NEO-7M-03.PNG

Reference Materials

Videos