Difference between revisions of "I2C-RPT-08"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 18: | Line 18: | ||
* 49x49mm form factor | * 49x49mm form factor | ||
* 4 solid 4-40 mounting holes | * 4 solid 4-40 mounting holes | ||
+ | |||
+ | == Drivers/Example Code == | ||
+ | |||
+ | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_I2CRPT08 Github repo] - Driver code | ||
+ | * [https://github.com/land-boards/lb-Arduino-Code/tree/master/LBCards/I2CRPT08 Github repo] - Example code | ||
== Assembly Sheet == | == Assembly Sheet == | ||
* [[I2C-RPT-08 Assembly Sheet]] | * [[I2C-RPT-08 Assembly Sheet]] |
Revision as of 00:28, 30 December 2019
Features
- I2C Hub / Repeater / Replicator / Multiplexer / De-multiplexer
- Eight I2C Ports
- Host port
- Controlled via I2C
- 3.3V or 5V host operation
- 3.3V or 5V slave ports operation
- Voltage translation between the ports
- A Raspberry PI which runs 3.3V can control an I2C device which runs at 5V
- Interrupt line on each channel and host
- 100KHz/400KHz operation
- On-board termination resistors
- 49x49mm form factor
- 4 solid 4-40 mounting holes
Drivers/Example Code
- Github repo - Driver code
- Github repo - Example code