IOP16 I2C

From Land Boards Wiki
Revision as of 19:04, 10 April 2022 by Blwikiadmin (talk | contribs) (→‎Timing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

I2C Interface

  • The I2C core provides register addresses that the CPU can read or written to
    • Address 0 -> DATA (write/read) or SLAVE ADDRESS (write)
    • Address 1 -> Command/Status Register (write/read)

Data Buffer (write/read)

  • bit 7-0 = Stores I2C read/write data, or
  • bit 7-1 = Holds the first seven address bits of the I2C slave device
  • bit 0 = I2C 1:read/0:write bit

Command Register (write)

  • bit 7-2 = Reserved
  • bit 1-0
    • 00: IDLE
    • 01: START
    • 10: nSTART
    • 11: STOP

Status Register (read)

  • bit 7-2 = Reserved
  • bit 1 = ERROR (I2C transaction error)
  • bit 0 = BUSY (I2C bus busy)

Timing

  • 400 KHz bit timing

FRONT PANEL READ WRITE WORKING 400 KHz-timing.PNG

Example (R32V2020)

; Write 0x22 to IOCON register (not sequential operations)
START
 lix		r8,0x01
 bsr		write_I2C_Ctrl_Reg
; I2C Slave address
 lix		r8,0x40
 bsr		write_I2C_Data_Address_Reg
IDLE
 lix		r8,0x00
 bsr		write_I2C_Ctrl_Reg
; IO control register
 lix		r8,0x05
 bsr		write_I2C_Data_Address_Reg
; STOP
 lix		r8,0x03
 bsr		write_I2C_Ctrl_Reg	
; Disable sequential operation
 lix		r8,0x22
 bsr		write_I2C_Data_Address_Reg