Difference between revisions of "ITX-BKOUT"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 3: | Line 3: | ||
* Breakout all [[FPGA-ITX-01]] pins into a breadboard style card | * Breakout all [[FPGA-ITX-01]] pins into a breadboard style card | ||
* 2x40 right angle pins to plug into [[FPGA-ITX-01]] | * 2x40 right angle pins to plug into [[FPGA-ITX-01]] | ||
| + | ** odd/even flip to allow direct plug in | ||
* Cuts to isolate pins can all be done on the rear of the card | * Cuts to isolate pins can all be done on the rear of the card | ||
* Power/Ground down the center of the card | * Power/Ground down the center of the card | ||
== Mechanicals == | == Mechanicals == | ||
Revision as of 00:06, 31 August 2022
- Breakout all FPGA-ITX-01 pins into a breadboard style card
- 2x40 right angle pins to plug into FPGA-ITX-01
- odd/even flip to allow direct plug in
- Cuts to isolate pins can all be done on the rear of the card
- Power/Ground down the center of the card
