Difference between revisions of "LEDS-SWITCHES-2 Assembly Sheet Rev 1"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 34: | Line 34: | ||
| 8 | | 8 | ||
| SS1-SS8 | | SS1-SS8 | ||
| − | | [https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=slide+switch+ss12d00g3&_sacat=0&LH_TitleDesc=0&LH_FS=1&_odkw=slide+switch+ss12d00g4&_osacat=0&_sop=15 SS12D00G3] | + | | [https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=slide+switch+ss12d00g3&_sacat=0&LH_TitleDesc=0&LH_FS=1&_odkw=slide+switch+ss12d00g4&_osacat=0&_sop=15 Slide Switch, SS12D00G3] |
|- | |- | ||
| 6 | | 6 | ||
Latest revision as of 14:28, 25 May 2022
- Resistors and Right Angle Header mount to rear of card
Parts List
| Find | Qty | Ref Des | Part Number |
|---|---|---|---|
| 1 | 8 | PB1-PB8 | Pushbutton, 6x6mm |
| 2 | 16 | R1-R16 | 10K (1/4W) |
| 3 | 8 | R17-R24 | 1K (1/4W) (NOTE 1) |
| 4 | 8 | D1-D8 | LED, 5mm (NOTE 2) |
| 5 | 8 | SS1-SS8 | Slide Switch, SS12D00G3 |
| 6 | 1 | J1 | Header, Right Angle, 2x16 |
Notes
- LED ballast resistor. Select value based on desired brightness. I like less bright LEDs.
- Select LED color. I prefer Orange. Select diffused or clear. I prefer diffused.
- Select pushbutton height per your preference. I like 6mm tall.
- 0.1" pins. Select either SS12D00G3 3 pin slide switch or 3 pin headers.
