Difference between revisions of "MIDI-IN-OUT"

From Land Boards Wiki
Jump to navigation Jump to search
Line 38: Line 38:
 
* Used when Host Serial interface is 5V
 
* Used when Host Serial interface is 5V
 
* Open when Host Serial interface is 3.3V
 
* Open when Host Serial interface is 3.3V
 +
 +
[[File:4N28-CurrentTransferRatio-curve.PNG]]
 +
 +
* LED Current vs voltage
 +
 +
[[File:4N28-LED-IvsV.PNG]]
 +
 +
* Output transistor capacitance
 +
 +
[[File:4N28-OutputCapacitance.PNG]]
 +
 +
* Switching Time
 +
 +
[[File:4N28-SwitchingTime.PNG]]
  
 
== Drive Circuit ==
 
== Drive Circuit ==

Revision as of 11:27, 29 September 2022

MIDI-IN-OUT REV1 FRONT 3D.png

Features

  • Module for Prototyping Synthesizer components
  • MIDI In/Out Jacks
  • Opto-isolated MIDI Input
  • 5V MIDI interface
  • 3.3V or 5V Serial connections
  • MIDI In is opto-isolated
  • (2) 4-40 Mounting holes

Connectors

J1 - MIDI In

MIDI IN SCHEMATIC.PNG

  • Opto-isolated input

J2 - MIDI Out

MIDI OUT SCHEMATIC.PNG

J3 - Serial/Power

  • Pinout
  1. V1 (3.3V or 5V
  2. 5V
  3. Receive data (out of card)
  4. Transmit (in to card)
  5. GND

J4 - Short V1 to 5V

  • Short J3-1 to J3-2
  • Used when Host Serial interface is 5V
  • Open when Host Serial interface is 3.3V

4N28-CurrentTransferRatio-curve.PNG

  • LED Current vs voltage

4N28-LED-IvsV.PNG

  • Output transistor capacitance

4N28-OutputCapacitance.PNG

  • Switching Time

4N28-SwitchingTime.PNG

Drive Circuit

4N28-DC-TransferRatio.PNG


  • Vf(LED) = 1.2V
  • R(total) = 220 * 3 = 660 Ohms
  • V(drive) = 5V
  • I(LED) = 5.7 mA
  • CTR = 50%