Difference between revisions of "MyMenu Assembly Sheet"

From Land Boards Wiki
Jump to navigation Jump to search
Line 66: Line 66:
 
OLEDS cards have varying power//ground pinouts. Install 0 ohm resistors or leave open resistors to match pinout of OLED card used
 
OLEDS cards have varying power//ground pinouts. Install 0 ohm resistors or leave open resistors to match pinout of OLED card used
  
* OLED card pin 1 = Vcc case
+
=== OLED card pin 1 = Vcc case, pin 2 = GND ===
** Install R10, R21 = 0 ohms for pin 1 = VCC, pin 2 = GND
+
 
** R11, R20 left open
+
* Install R10, R21 = 0 ohms for pin 1 = VCC, pin 2 = GND
* OLED card pin 1 = GND case for pin 1 = GND, pin 2 = VCC
+
* R11, R20 left open
** Install R11, R20 = 0 ohms for pin 1 = GND case
+
 
** R10, R21 left open
+
=== OLED card pin 1 = GND case for pin 1 = GND, pin 2 = VCC ===
 +
 
 +
* Install R11, R20 = 0 ohms for pin 1 = GND case
 +
* R10, R21 left open

Revision as of 18:26, 6 June 2022

MyMenu-X3-AssySheet.PNG

Parts List

Qty Value RefDes Qty Value RefDes
3 0 (0805) R14,R16,R18 3 LED (0805) D1-D3
4 0/OPEN (0805) R10,R11,R20,R21 2 CONN_4 P1,P3
6 10K (0805) R6-R9,R12,R19 1 CONN, 5x1 P2
2 2.2K (0805) R1,R2 5 SW_PUSH, 6mm SW1-SW5
3 330 (0805) R3-R5 1 MCP23008SO U1
3 DNP (0805) R13,R15,R17

OLED Power Option

OLEDS cards have varying power//ground pinouts. Install 0 ohm resistors or leave open resistors to match pinout of OLED card used

OLED card pin 1 = Vcc case, pin 2 = GND

  • Install R10, R21 = 0 ohms for pin 1 = VCC, pin 2 = GND
  • R11, R20 left open

OLED card pin 1 = GND case for pin 1 = GND, pin 2 = VCC

  • Install R11, R20 = 0 ohms for pin 1 = GND case
  • R10, R21 left open