Noise Generator on ER-PROTO-01

From Land Boards Wiki
Jump to navigation Jump to search
  • White Noise Generator

ER-PROTO-01 NOISE WHITE.PNG

  • Blue/Pink Noise

ER-PROTO-01 NOISE PINK BLUE.PNG

  • U1 Power

ER-PROTO-01 U1 PWR.PNG

  • Eurorack Power

ER-PROTO-01 EURORACK PWR.PNG

Connectors

  • Jacks

ER-PROTO-DB-01 J38.png


Build

On Controls Card

  • Install J1, J3, J4
  • Wire J1-S to J3-S
  • Wire J3-S to J4-S

On Daughtercard

  • Wire J38-3 or J38-5 to nearby GND
  • Install U1 14 pin socket near "middle of card
    • Pin 4 goes towards +12V
  • Add 10 Ohm resistor U1-4 to +12V
  • Add jumper U1-11 to GND
  • Add jumper U1-4 to U1-7
  • Install 1K J1-8 to Open bus
  • Install 1K J3-6 to Open bus
  • Install 1K J4-4 to Open bus
Retrieved from "http://land-boards.com/blwiki/index.php?title=Noise_Generator_on_ER-PROTO-01&oldid=22226"