Difference between revisions of "OPTOUSB"

Revision as of 19:59, 29 December 2019

USB to TTL level Serial (FTDI) Interface
Genuine FTDI FT230XS part
Standard FTDI drivers
Buffered lines on the TTL level side
Schmidt Trigger
Voltage level hysteresis
Improved slew rate
OptoIsolated Connections
Transmit, Receive, RTS, CTS
Configured for High Speed Serial
The Host USB connection is independent of the state of the FTDI side of the interface
Host side can communicate with the USB host whether or not the target is even powered up
Target power on/off doesn't cause a USB disconnect - handy for debug
Fast operation
3.3V or 5V FTDI voltage (order option)
Transmit/Receive LED Connectors
On-board LED resistors
49x49mm card
(4) #4 Mounting Holes

Revision as of 19:58, 29 December 2019 (view source) Blwikiadmin (talk \| contribs) (Created page with "== Features == * USB to TTL level Serial (FTDI) Interface * Genuine FTDI FT230XS part * Standard FTDI drivers * Buffered lines on the TTL level side * Schmidt Trigger * Volta...")		Revision as of 19:59, 29 December 2019 (view source) Blwikiadmin (talk \| contribs) (→‎Features) Newer edit →
Line 1:		Line 1:
		+	[[File:OptoUSB-177-720px.jpg]]
		+
	== Features ==		== Features ==