Difference between revisions of "Octopus Tester"

From Land Boards Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
* [http://n5bl.org/pipermail/builders_n5bl.org/attachments/20150514/6b8107e1/attachment-0001.pdf Octopus Tester] - Design example (N5BL)
 
* [http://n5bl.org/pipermail/builders_n5bl.org/attachments/20150514/6b8107e1/attachment-0001.pdf Octopus Tester] - Design example (N5BL)
* Look at scope pattern for device signature
+
* Scope set to X-Y for voltage-vs-current measurement of part
 +
** Look at scope pattern for device signature
 
* Out of circuit component tester
 
* Out of circuit component tester
 
* In circuit component tester
 
* In circuit component tester

Revision as of 14:26, 4 September 2021

  • Octopus Tester - Design example (N5BL)
  • Scope set to X-Y for voltage-vs-current measurement of part
    • Look at scope pattern for device signature
  • Out of circuit component tester
  • In circuit component tester
    • Test 2 units and compare signatures on sacope
  • Use 6.3V "filament" transformer
  • 1mA, 10mA switch
    • Pot adjustments to set current (transformer variances)
  • 2 BNC jacks
    • Connect to XY on scope (X=CH1, Y=CH2)
  • Plus, Minus Banana jacks
  • AC powered
  • C13 jack with switch
  • Fuse
  • Build into Bud Box CU-1945

Schematics

OctopusTester SCHEM.PNG

Videos

Cutouts on Bud Box CU-1945

OctopusTester FRONT-BACK.PNG