Difference between revisions of "OptoFastBi"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "4-Channel Opto-Isolator card 2-Channels in each direction 4N25 Optoisolators Input /Output isolation Transistor driver for Opto LED reduces required drive from 20 mA to under...") |
Blwikiadmin (talk | contribs) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | 4-Channel Opto-Isolator card | + | [[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/two-optos-in-two-directions-optofastbi/]] |
| − | 2-Channels in each direction | + | |
| − | 4N25 Optoisolators | + | [[File:OptoFastBi-P672-720px.jpg]] |
| − | Input /Output isolation | + | |
| − | Transistor driver for Opto LED reduces required drive from 20 mA to under 500 uA | + | == Features == |
| − | 5V Input channels share their own common VCC/Ground | + | |
| − | 5V Output channels share their own common Vcc/Ground | + | * 4-Channel Opto-Isolator card |
| − | 8-pin headers for input/output | + | * 2-Channels in each direction |
| − | Configuration Options | + | * 4N25 Optoisolators |
| − | Speed enhanced | + | * Input /Output isolation |
| − | Bypass Input transistors | + | * Transistor driver for Opto LED reduces required drive from 20 mA to under 500 uA |
| − | Remove Output collector resistors | + | * 5V Input channels share their own common VCC/Ground |
| − | 49x49mm | + | * 5V Output channels share their own common Vcc/Ground |
| − | (4) 4-40 mounting holes | + | * 8-pin headers for input/output |
| + | * Configuration Options | ||
| + | * Speed enhanced | ||
| + | * Bypass Input transistors | ||
| + | * Remove Output collector resistors | ||
| + | * 49x49mm | ||
| + | * (4) 4-40 mounting holes | ||
| + | |||
| + | == Assembly Sheet == | ||
| + | |||
| + | * [[OptoFastBi Assembly Sheet]] | ||
Latest revision as of 23:56, 29 December 2019
Features
- 4-Channel Opto-Isolator card
- 2-Channels in each direction
- 4N25 Optoisolators
- Input /Output isolation
- Transistor driver for Opto LED reduces required drive from 20 mA to under 500 uA
- 5V Input channels share their own common VCC/Ground
- 5V Output channels share their own common Vcc/Ground
- 8-pin headers for input/output
- Configuration Options
- Speed enhanced
- Bypass Input transistors
- Remove Output collector resistors
- 49x49mm
- (4) 4-40 mounting holes
