Difference between revisions of "PiPicoMite01 Rev2 Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 147: | Line 147: | ||
| 1 | | 1 | ||
| SD1 | | SD1 | ||
| − | | [https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/gmc02008xhr.pdf Conn, SD Card] | + | | [https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/gmc02008xhr.pdf Conn, SD Card] [https://www.mouser.com/ProductDetail/Amphenol-Commercial-Products/GMC020080HR?qs=W0yvOO0ixfGUck2%252BUqFamw%3D%3D Mouser] |
| | | | ||
| | | | ||
Revision as of 16:42, 9 June 2022
Parts List
| Find | Qty | Ref Des | Part Number | Find | Qty | Ref Des | Part Number | |
|---|---|---|---|---|---|---|---|---|
| 1 | 4 | C1, C2, C6, C8 | 0.1uF | 15 | 1 | U2 | Socket. 28-pin, 0.3in | |
| 2 | 2 | C3, C5 | 47uF | 16 | 1 | H1 | Header, Vert, 2x2 | |
| 3 | 2 | C4, C7 | 47nF | 17 | 1 | H2 | Header, Vert, 1x2 | |
| 4 | 1 | D1 | 1N5819 | 18 | 1 | J1 | Header, Vert, 2x10 | |
| 5 | 1 | D2 | MBR0520T1H | 19 | 1 | J3 | Header, Vert, 2x8 | |
| 6 | 6 | R1, R2, R10, R11, R13, R14 | 2.2K | 20 | 1 | J6 | Header, Vert, 2x3 | |
| 7 | 2 | R3, R4 | 270 | 21 | 1 | J8 | Header, Rt Angle, 1x4 | |
| 8 | 1 | R5 | 390 | 22 | 1 | J2 | CONN, DB15HD, BLUE (VGA) | |
| 9 | 2 | R6, R8 | 47 | 23 | 1 | J7 | PS2_DIN6 | |
| 10 | 1 | R7 | 820 | 24 | 1 | J4 | AudioJack3 | |
| 11 | 2 | R9, R12 | 1K | 25 | 1 | J5 | USB-B | |
| 12 | 2 | R15, R16 | 10K | 26 | 1 | U1 | RPi-PICO | |
| 13 | 1 | U3 | TXS0104ED | 27 | 1 | U2 | MCP23017_SP | |
| 14 | 1 | SD1 | Conn, SD Card Mouser |
Notes
- Can use 1N400x in place of Schottky diode at D1/D2 location
- DC can be provided via header pins on J6 so J5 (USB B power connector) can be omitted
- U2 socket is optional
- Install shunts at H1, H2 as required per wiki page
- Resistor pads fit either 1/8W or 1/4W parts
