QT Py

From Land Boards Wiki
Jump to navigation Jump to search

QT Py 4600-06.jpg

  • Same size, form-factor, and pin-out as Seeed Xiao
  • ATSAMD21E18 32-bit Cortex M0+ - 48 MHz 32 bit processor with 256KB Flash and 32 KB RAM
  • Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, MIDI, Keyboard/Mouse HID, even a little disk drive for storing Python scripts.
  • Can be used with Arduino IDE or CircuitPython
  • Built in RGB NeoPixel LED
  • 11 GPIO pins:
    • True analog output on one I/O pin - can be used to play 10-bit quality audio clips in Arduino (CircuitPython does not have storage for audio clips)
    • 9 x 12-bit analog inputs (SDA/SCL do not have analog inputs)
    • 1 x Optional AREF on A1
    • 9 x PWM outputs (A0 is analog out, A1 is not PWM capable)
    • Hardware I2C port with STEMMA QT plug-n-play connector
    • Hardware UART
    • Hardware SPI
    • Hardware I2S
    • 6 x Capacitive Touch with no additional components required
  • 3.3V regulator with 600mA peak output AP2112
  • Optional SOIC-8 SPI Flash chip on bottom
  • Reset switch for starting your project code over or entering bootloader mode
  • USB Type C connector
  • Really really small

CircuitPython

Flash EEPROM 2 MB

QT Py 4600-07.jpg

Links