Difference between revisions of "RF Amplifiers"

From Land Boards Wiki
Jump to navigation Jump to search
(Created page with "[file:LNA-720px.jpg]]")
 
Line 1: Line 1:
[file:LNA-720px.jpg]]
+
[[file:LNA-720px.jpg]]
 +
 
 +
5M-6GHz Low Noise RF Amplifier Ultra Wideband Gain 20dB Medium Power Amplifier Board
 +
 
 +
== Features ==
 +
 
 +
* 5M-6GHz RF signal power amplifier with 20dB gain
 +
* Large dynamic range and wide operating frequency range
 +
* Suitable for all types of fixed gain amplification of RF signal
 +
* Wide frequency range, stable gain, small noise figure and large dynamic range (+ 20dBm @ 1dBP)
 +
* Suitable for all kinds of RF transmitting circuits to extend communications distance
 +
* Perfect for short-wave, FM broadcast, remote control receivers, cable TV signal amplifiers, Beidou, GPS satellite navigation, 2.4G Bluetooth, WIFI receiver RF end and other RF amplification
 +
* A shielded enclosure with anti-reverse protection diodes
 +
 
 +
== Technical Parameters ==
 +
* Operating Frequency: 5M-6GHz (5-6000MHz)
 +
* Amplifier Gain: 20dB                                       
 +
* Max. Output Power: +21dBm(100mW)@1dB compression point
 +
* Working Current: 85mA (5V)
 +
* Power Supply Voltage: 5VDC
 +
* System Impedance: 50Ω
 +
* Weight: 5g

Revision as of 13:53, 26 September 2021

LNA-720px.jpg

5M-6GHz Low Noise RF Amplifier Ultra Wideband Gain 20dB Medium Power Amplifier Board

Features

  • 5M-6GHz RF signal power amplifier with 20dB gain
  • Large dynamic range and wide operating frequency range
  • Suitable for all types of fixed gain amplification of RF signal
  • Wide frequency range, stable gain, small noise figure and large dynamic range (+ 20dBm @ 1dBP)
  • Suitable for all kinds of RF transmitting circuits to extend communications distance
  • Perfect for short-wave, FM broadcast, remote control receivers, cable TV signal amplifiers, Beidou, GPS satellite navigation, 2.4G Bluetooth, WIFI receiver RF end and other RF amplification
  • A shielded enclosure with anti-reverse protection diodes

Technical Parameters

  • Operating Frequency: 5M-6GHz (5-6000MHz)
  • Amplifier Gain: 20dB
  • Max. Output Power: +21dBm(100mW)@1dB compression point
  • Working Current: 85mA (5V)
  • Power Supply Voltage: 5VDC
  • System Impedance: 50Ω
  • Weight: 5g