Difference between revisions of "RPI PSOC5"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 4: | Line 4: | ||
== Features == | == Features == | ||
| + | |||
| + | * Raspberry Pi Compatible | ||
| + | ** 40 pin GPIO connector | ||
| + | ** Connects to all GPIO pins of the Raspberry Pi | ||
| + | * Programmable System on a Chip (PSoC) | ||
| + | ** Cypress Semiconductor | ||
| + | * USB Micro connector | ||
| + | ** Placed in the same location as a Raspberry Pi | ||
| + | * 3.3V regulator | ||
| + | * 3.3V or 5V I/O | ||
| + | ** H3 - Voltage Select Jumper | ||
| + | * On-board LED | ||
== Drivers/Source Code == | == Drivers/Source Code == | ||
== Assembly Sheet == | == Assembly Sheet == | ||
Revision as of 22:52, 30 December 2019
Raspberry Pi Clone
Features
- Raspberry Pi Compatible
- 40 pin GPIO connector
- Connects to all GPIO pins of the Raspberry Pi
- Programmable System on a Chip (PSoC)
- Cypress Semiconductor
- USB Micro connector
- Placed in the same location as a Raspberry Pi
- 3.3V regulator
- 3.3V or 5V I/O
- H3 - Voltage Select Jumper
- On-board LED
