Difference between revisions of "SH-LEV-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→J1/J2) |
||
| (19 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
== Features == | == Features == | ||
| − | * | + | * 8-bit Bidirectional Level Shifter |
| − | * | + | * 2x [https://www.ti.com/product/TXS0104E TXS0104ED] |
| − | * | + | * "High" voltage to "Low" voltage Bidirectional Level Shifter |
| + | ** 1.65 V to 3.6 V on Low Voltage port | ||
| + | ** 2.3 V to 5.5 V on High Voltage port (VCCA ≤ VCCB) | ||
| + | ** Typical use as 3.3V to 5V level shifter | ||
| + | * No Direction-Control Signal Needed | ||
| + | * Max Data Rates | ||
| + | ** 24 Mbps (Push Pull) | ||
| + | ** 2 Mbps (Open Drain) | ||
| + | * 49x49mm card | ||
| + | * (4) 4-40 Mounting Holes | ||
| + | |||
| + | == Connectors == | ||
| + | |||
| + | [[file:SH-LEV-01_CAD_Rev1.PNG]] | ||
| + | |||
| + | === J1/J2 === | ||
| + | |||
| + | * 1x12 Low and High side connectors | ||
| + | * Extra power/ground pins for drop to other optional cards | ||
| + | |||
| + | == 3D == | ||
| + | |||
| + | [[file:SH-LEV-01_FRONT_3D.png]] | ||
| + | |||
| + | [[file:SH-LEV-01_REAR_3D.png]] | ||
| + | |||
| + | == Mechanicals == | ||
| + | |||
| + | [[file:SH-LEV-01_MECHS_Rev1.PNG]] | ||
| + | |||
| + | == Assembly Sheet == | ||
| + | |||
| + | [[SH-LEV-01 Rev 1 Assembly Sheet]] | ||
Latest revision as of 11:54, 20 August 2022
Features
- 8-bit Bidirectional Level Shifter
- 2x TXS0104ED
- "High" voltage to "Low" voltage Bidirectional Level Shifter
- 1.65 V to 3.6 V on Low Voltage port
- 2.3 V to 5.5 V on High Voltage port (VCCA ≤ VCCB)
- Typical use as 3.3V to 5V level shifter
- No Direction-Control Signal Needed
- Max Data Rates
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
- 49x49mm card
- (4) 4-40 Mounting Holes
Connectors
J1/J2
- 1x12 Low and High side connectors
- Extra power/ground pins for drop to other optional cards
3D
Mechanicals
