Difference between revisions of "SWLEDX8"

From Land Boards Wiki
Jump to navigation Jump to search
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:SWLEDX8-I2C-P118-720px.jpg]]
+
[[File:SWLEDX8-I2C-P119-Orth-720px_2.jpg]]
 +
 
 +
<video type="youtube">Eh4sLUga6aM</video>
  
 
== Features ==
 
== Features ==
 +
 +
This card provides a very easy way to mount switches and/or LEDs in an enclosure.
  
 
* (8) LEDs
 
* (8) LEDs
Line 10: Line 14:
 
* (4) #4-40 mounting holes
 
* (4) #4-40 mounting holes
 
* Optional part of a two-card system with [[SWLEDX8-I2C]]
 
* Optional part of a two-card system with [[SWLEDX8-I2C]]
 +
 +
== Build Options ==
 +
 +
* P1 header can be in installed on the front or rear of the car
 +
* P1 header can be right angle or straight
 +
 +
== P1 right angle mounted on rear ==
 +
 +
[[file:SWLEDX8_Rev2_Front_(Right)_3D.png]]
 +
 +
[[file:SWLEDX8_Rev2_Rear_(Right)_3D.png]]
 +
 +
== P1 straight mounted on rear ==
 +
 +
* Useful when stacked above [[SWLEDX8-I2C]] card
 +
** Only need 1 header if soldering directly to both boards
 +
 +
[[file:SWLEDX8_Rev2_Front_(Straight)_3D.png]]
 +
 +
[[file:SWLEDX8_Rev2_Straight_3D.png]]
  
 
== Connector ==
 
== Connector ==
  
* Connector mounts on rear side of the card and can be used to connect to [[SWLEDX8-I2C]]
+
* Connector can be mounted on the rear side of the card to connect to [[SWLEDX8-I2C]]
  
 
* S0-S7 - Switches
 
* S0-S7 - Switches
Line 23: Line 47:
  
 
[[File:SW8LED-Rev2_MECHS.png]]
 
[[File:SW8LED-Rev2_MECHS.png]]
 +
 +
== Example Applications ==
 +
 +
The corner mounting holes make the card easy to use. Here's some applications using the card.
 +
 +
=== Z80-MBC2 - LEDs Application ===
 +
 +
[[file:SWLEDX8_Application_Z80-MBC2.PNG]]
 +
 +
=== MultiComp in a Box - Switches Application ===
 +
 +
[[file:SWLEDX8_Application_MultiCompInABox.PNG]]
  
 
== Assembly Sheet ==
 
== Assembly Sheet ==
  
 
* [[SW8LED Assembly Sheet Rev2]]
 
* [[SW8LED Assembly Sheet Rev2]]

Latest revision as of 18:37, 3 June 2022

SWLEDX8-I2C-P119-Orth-720px 2.jpg

Features

This card provides a very easy way to mount switches and/or LEDs in an enclosure.

  • (8) LEDs
  • (8) Slide Switches
  • 2x10 pin connector
    • 0.1" pitch connector
  • 59mmx38mm
  • (4) #4-40 mounting holes
  • Optional part of a two-card system with SWLEDX8-I2C

Build Options

  • P1 header can be in installed on the front or rear of the car
  • P1 header can be right angle or straight

P1 right angle mounted on rear

SWLEDX8 Rev2 Front (Right) 3D.png

SWLEDX8 Rev2 Rear (Right) 3D.png

P1 straight mounted on rear

  • Useful when stacked above SWLEDX8-I2C card
    • Only need 1 header if soldering directly to both boards

SWLEDX8 Rev2 Front (Straight) 3D.png

SWLEDX8 Rev2 Straight 3D.png

Connector

  • Connector can be mounted on the rear side of the card to connect to SWLEDX8-I2C
  • S0-S7 - Switches
  • L0-L7 = LEDs

SWLEDX8 J1.PNG

Mechanicals

SW8LED-Rev2 MECHS.png

Example Applications

The corner mounting holes make the card easy to use. Here's some applications using the card.

Z80-MBC2 - LEDs Application

SWLEDX8 Application Z80-MBC2.PNG

MultiComp in a Box - Switches Application

SWLEDX8 Application MultiCompInABox.PNG

Assembly Sheet